Airtac MDJ Adjustable Cylinder MDJ32X60-50
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X60-50 is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X60-50
The AirTAC MDJ series is a compact multi-mount cylinder: a square-body pneumatic cylinder that can be fixed from 6 directions (front, back, left, right, top and bottom) and mounted side by side to save space on the machine frame. This MDJ32X60-50 is the adjustable-stroke, double-acting variant in a 32 mm bore with a 60 mm stroke and a 50 mm adjustable-stroke code. A double-acting 32 mm bore delivers a theoretical push thrust of 402.1 N at 0.5 MPa, well suited to clamping, stopping and jig positioning, and the cushioning at each end is a bumper that absorbs end-of-stroke impact.
This is a genuine AirTAC part. The MD family is the standard multi-mount series, while the MK family is the no-rotating alternative for jobs where the rod must not turn. The SKU has no trailing S, so this cylinder is supplied without a magnet. Operating pressure is 0.15-1.0 MPa (22-145 psi) with air filtered to 40 um. We confirm exact dimensions and sizing for your stroke from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ32X60-50 Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X60-50 |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore size sets the thrust: a 32 mm bore pushes with a theoretical 402.1 N at 0.5 MPa, with 345.6 N on the pull side. Choose MD if rod rotation is acceptable and MK if it must be prevented. This MDJ is double acting with an adjustable stroke; a 60 mm stroke sits at the top of the bore 32 double-acting table, and the short cover means an over-long stroke should be checked before you order. Adjustable-stroke MDJ models add an adjustable range on top of the base stroke (table ranges of 10, 20 and 30 mm; confirm the exact figure for this SKU from the datasheet). This SKU has no magnet; add S to the code if you need one, and select PT or G thread. Side-load limits are confirmed from the datasheet.
Applications
Pick-and-place part transfer
Mounted under a compact gantry, the cylinder extends and retracts a gripper plate to pick parts from a nest and place them into a next-stage fixture.
Indexing push on a rotary dial table
Fixed to the machine base, the cylinder advances to index or pre-position work carriers on a dial, with the adjustable stroke dialled in to match the carrier pitch.
Lift-and-lower ejector in a stacking station
Mounted vertically under a stack tray, the rod lifts the bottom carton to a pick height, taking advantage of top or bottom mounting on the same compact body.
FAQ
Should I choose an MD or an MK cylinder here?
MD is the standard multi-mount family and allows the rod to rotate; MK adds a no-rotating plate and fixed rod that prevent rotation. This MDJ32X60-50 is the adjustable-stroke MD variant. If your load must not turn, pick the MK equivalent.
Is a 60 mm stroke too long for a 32 mm bore?
Sixty millimetres is the maximum stroke in the double-acting table for a 32 mm bore, and the short cover means an over-long stroke should be checked against your application before ordering. Confirm the stroke-specific dimensions and side-load limits from the datasheet.