Airtac MDJ Adjustable Cylinder MDJ6X10-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ6X10-10S is a genuine MD multi-mount cylinder (adjustable stroke), 6 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 14.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore6 mm
- Push thrust @0.5 MPa14.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ6X10-10S
The MDJ6X10-10S is an adjustable-stroke multi-mount cylinder with a 6 mm bore, a 10 mm base stroke and a 10 mm adjustable range. The compact square body fixes from six directions - front, back, left, right, top and bottom - so units can be mounted side by side in very tight spaces, with magnetic-switch slots around the body and high guide precision. As a double acting cylinder it gives a theoretical push force of 14.1 N at 0.5 MPa, and cushioning is provided by a bumper.
This is a genuine AirTAC part from the MD family, the standard multi-mount series; the MK family is the separate no-rotating version. The trailing S in the SKU shows this model is supplied with a magnet for magnetic-switch detection. It has M5x0.8 PT-threaded ports, runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and from -20 to 70 C, extendable to 150 C only with the optional high-temperature seal material. We confirm exact dimensions and sizing details from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ6X10-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ6X10-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 14.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 6 mm bore suits light-duty work, delivering a theoretical 14.1 N push at 0.5 MPa on this double acting model; step up a bore size when more force is needed. If the rod must not rotate, choose the MK family instead. This is the adjustable-stroke MDJ version, where the 10 mm adjustable range sits on top of the 10 mm base stroke; keep strokes as short as the application allows, since the short cover design cautions against over-long strokes. This SKU carries the S suffix, meaning a magnet is fitted - order without the S if detection is not required. Thread options are PT (as on this SKU) or G, and we confirm side load and dimensions from the datasheet on request.
Applications
Small-parts clamp with position check
Clamps delicate components with a theoretical 14.1 N push at 0.5 MPa while the fitted magnet and the switch slots around the body allow a magnetic switch to confirm clamp and release at the controller.
Jig stopper for tiny components
Stops or locates miniature parts at a jig station, mounted from any of the six body faces. The 10 mm adjustable range allows the stop point to be trimmed during changeover without swapping cylinders.
Compact pick-and-place push-off
Pushes small parts off a nest as part of a pick-and-place cell. Multiple units mount side by side on tight pitch, and the magnet lets the control system detect each cylinder's end positions.
FAQ
What does the S at the end of MDJ6X10-10S mean?
The trailing S shows this cylinder is supplied with a magnet, so a magnetic switch can be snapped into the slots around the square body to sense piston position. The same model ordered as MDJ6X10-10, without the S, is supplied without a magnet. The S is optional, not a standard fitting on every unit.
Can this cylinder be used with a long stroke?
Keep the stroke as short as the application allows: the short cover design of the multi-mount series cautions against over-long strokes, and overall dimensions change with the stroke, so confirm the exact figures from the datasheet. For anything beyond the sizes shown or questions about side load, ask us and we will check the datasheet with you.