Airtac MDJ Adjustable Cylinder MDJ6X25-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ6X25-10S is a genuine MD multi-mount cylinder (adjustable stroke), 6 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 14.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore6 mm
- Push thrust @0.5 MPa14.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ6X25-10S
The MDJ6X25-10S is a compact square-body multi-mount cylinder that can be fixed from 6 directions - front, back, left, right, top and bottom - and mounted side by side to save space, with magnetic-switch slots around the body. With a 6 mm bore and 25 mm stroke plus a 10 mm adjustable range, it is a double-acting cylinder for light-duty push-pull work: at 0.5 MPa it delivers a theoretical push thrust of 14.1 N, and cushioning is provided by a bumper.
This is a genuine AirTAC part in the MD standard family (the MK family is the no-rotating counterpart). The trailing S shows this SKU is supplied with magnet. We confirm dimensions, weights and sizing details from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ6X25-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ6X25-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 14.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the 6 mm bore where you need up to 14.1 N push at 0.5 MPa in the tightest possible footprint; step up in bore for more thrust. Stay in the MD family if rod rotation is acceptable - MK variants prevent it. The 25 mm stroke sits within the bore-6 double-acting table (up to 35 mm), and the J designation adds a 10 mm adjustable stroke on top. The trailing S means this SKU includes a magnet for switch sensing on the body slots. Thread is PT; G is available on request. Keep strokes modest, as short covers limit very long strokes, and confirm side-load capability with us.
Applications
Small-parts clamping
Fix this cylinder through whichever of the 6 body faces suits the fixture and use the 14.1 N push at 0.5 MPa to hold small components during assembly.
Jig positioning with position checks
Mount cylinders side by side in a jig and use the magnet plus body switch slots to confirm the adjusted stop position at each station.
Conveyor stopper or gate
Fix from the top or side of a light gate or stopper and drive it double-acting over 25 mm of travel, adjustable by a further 10 mm.
FAQ
Is the magnet on MDJ6X25-10S standard?
The magnet is optional on MD multi-mount cylinders and is fitted only where the SKU ends in S. MDJ6X25-10S is supplied with magnet, which works with the magnetic-switch slots around the body; the same cylinder without the S suffix comes magnet-free. Exact sensor selection is listed in the AirTAC catalogue.
How far can I adjust the stroke?
The J version carries a 10 mm adjustable range on top of the 25 mm basic stroke, within the bore-6 double-acting maximum of 35 mm. Because very long strokes run into the short cover, keep the total within the table and confirm exact body dimensions and side-load capability from the datasheet or by asking us.