Airtac MDJ Adjustable Cylinder MDJ6X35-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ6X35-10S is a genuine MD multi-mount cylinder (adjustable stroke), 6 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 14.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore6 mm
- Push thrust @0.5 MPa14.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ6X35-10S
The MDJ6X35-10S is an adjustable-stroke multi-mount cylinder: a compact square-bodied double acting cylinder you can fix from 6 directions - front, back, left, right, top and bottom - and line up side by side to save space. The 6 mm bore with a 35 mm stroke plus a 10 mm adjustable range fits fine positioning on small machines where the final working length is trimmed during setup. At 0.5 MPa the bore gives about 14.1 N theoretical push force, the cushion is a bumper, and magnetic-switch slots run around the body with no lubricant needed thanks to high guide precision.
This is a genuine AirTAC part, an MDJ adjustable-stroke member of the MD standard multi-mount family. The trailing S means the SKU is built with a magnet for switch detection. Exact dimensions and sizing for your stroke can be confirmed from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ6X35-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ6X35-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 14.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the bore by thrust: at 0.5 MPa this 6 mm bore yields 14.1 N theoretical push, so step up a bore if the job needs more force. MD is the standard family where rod rotation is allowed; choose MK if the rod must not rotate. This unit is double acting with an adjustable stroke; single push, single pull and double rod variants also exist. Stroke follows the bore 6 double acting table, up to 35 mm, and the MDJ adds a 10 mm adjustable range - beware an over-long stroke fouling the short cover. The S suffix provides the magnet; thread is PT as coded, or specify G.
Applications
Pick-and-place of small parts
Drive compact grippers or vacuum cups on tiny pick-and-place heads. The 6-way fix lets you bolt the cylinder in any orientation, and the adjustable stroke dials in the part transfer height.
Adjustable jig stops
Set repeatable part positions on assembly jigs. The 10 mm adjustable range allows fine trim-out at commissioning, while the square body mounts side by side for multi-circuit jigs.
Micro press and ejection
Provide light press or eject action on compact fixtures with 14.1 N theoretical push at 0.5 MPa. The bumper cushion smooths the end of each short, fast stroke.
FAQ
How do I choose between MD and MK, or between acting types?
MD is the standard multi-mount cylinder where some rod rotation is allowed; MK adds a no-rotating plate if the rod must stay oriented. Within MD you pick double acting (like this MDJ6X35-10S), single push, single pull, double rod or adjustable stroke, then bore and stroke - bore 6 double acting gives 14.1 N theoretical push at 0.5 MPa.
Can I fix this cylinder from any face, and how do I verify dimensions?
Yes - the multi-mount body fixes from 6 directions (front, back, left, right, top, bottom) and can be mounted side by side to save space, with magnetic-switch slots around the body. Overall dimensions depend on the stroke, so confirm them from the datasheet, and route any side-load question to us before applying a side force.