Airtac MDJ Adjustable Cylinder MDJ6X35-20S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ6X35-20S is a genuine MD multi-mount cylinder (adjustable stroke), 6 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 14.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore6 mm
- Push thrust @0.5 MPa14.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ6X35-20S
The MDJ6X35-20S is an adjustable-stroke multi-mount cylinder: a compact square-bodied double acting cylinder that fixes from 6 directions - front, back, left, right, top and bottom - and mounts side by side with other cylinders to save space. With a 6 mm bore, 35 mm stroke and a 20 mm adjustable range, it covers small push, clamp and stop jobs where the working length is tuned on installation. Theoretical push force at 0.5 MPa is about 14.1 N for this bore, the cushion is a bumper, and magnetic-switch slots are machined around the body with no added lubricant required.
This is a genuine AirTAC part, the MDJ adjustable-stroke version in the MD standard multi-mount family. The trailing S means this SKU comes with a magnet for position switches. We can confirm dimensions and sizing for your exact stroke from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ6X35-20S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ6X35-20S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 14.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Start with thrust: at 0.5 MPa this 6 mm bore provides 14.1 N theoretical push, so move up a bore if your application needs more. MD is the standard multi-mount where rod rotation is permitted; pick MK when rotation must be prevented. This model is double acting with adjustable stroke; the range also includes single push, single pull and double rod. Stroke follows the bore 6 double acting table up to 35 mm, with this MDJ adding a 20 mm adjustable range - note the short cover cautions against an over-long stroke. The S suffix means the magnet is fitted; thread is PT as coded, and G is available.
Applications
Light-duty part clamping
Hold small housings or brackets during bonding or screwdriving. The 20 mm adjustable range lets technicians fine-tune clamp position, and 6-direction fixing fits crowded fixtures.
Part alignment on conveyors
Nudge and square up small parts against a guide on narrow conveyor lines. The side-by-side mounting keeps multi-cylinder banks tidy, and the bumper cushions each touch.
Lift-and-lower check stations
Raise or lower small parts between a chute and a sensor nest at inspection points. Fixing from 6 directions, including top and bottom, simplifies mounting in tight vertical envelopes.
FAQ
What does the trailing S on MDJ6X35-20S mean, and what about the thread?
The S means this SKU is built with a magnet, so magnetic switches can detect rod position in the slots around the body; SKUs without an S have no magnet. The code as shown specifies PT thread; a trailing G would instead specify G thread. Ports are M5x0.8 on this 6 mm bore.
How far can I adjust the stroke, and what stroke limit should I respect?
The MDJ design adds a 20 mm adjustable range on top of the coded 35 mm stroke, set on the machine during installation. For bore 6 double acting, stroke runs up to 35 mm, and a short cover means an over-long stroke risks fouling - keep strokes conservative. Overall dimensions are stroke-dependent, so confirm them from the datasheet and check side-load limits with us.