Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 110mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA
Generating 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore JIS-standard round-body cylinder features a 110 mm stroke and a CA pivot back cover. Its SUS304 stainless steel barrel and riveted aluminium covers resist mild corrosion and washdown environments. The piston relies on a heterogeneous two-way seal that retains an oil film for long service life.
For the same bore and stroke, the MF body is notably shorter than an ISO 6432 cylinder, saving valuable mounting length in tight fixtures. The integrated -S magnet enables CMSG, DMSG, or EMSG position sensing. Plan for roughly 241 N of actual work at 0.5 MPa, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin. This unit uses a 1/4 inch port and fixed TPU bumper pads that decelerate the stroke end without adjustable cushioning.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA Is Used
Package Diverter Arm
Swings a sorting gate on a packaging line using the CA pivot mount, utilizing the 402.2 N push force to redirect parcels reliably at high speeds.
Pallet Lift Stopper
Acts as a pneumatic stop for pallets entering a stretch wrapper, safely halting loads up to 20.5 kg vertically before the wrap cycle begins.
Textile Loom Tensioner
Adjusts yarn tensioning rollers in a textile machine, where the SUS304 stainless barrel withstands humid manufacturing conditions.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA the Right Cylinder?
When sizing this 32 mm bore, stepping down to the MF25 yields 245.3 N of push force at 0.5 MPa, while stepping up to the MF40 provides 628.3 N. If your application requires holding a load vertically during air loss or valve centering, note that a plain cylinder drifts; the TPU bumpers only soften the stroke end rather than acting as a brake. You must add an external rod lock or a pilot-operated check valve for secure positioning.
The CA pivot back cover suits angular movements, and you can pair it with LB foot, FA flange, SDB pivot, or TC trunnion mounts. The male M10x1.25 rod thread handles the 12 mm piston rod. For a 110 mm stroke, ensure your guiding structure minimizes side loads to prevent rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA FAQ
This 32 mm bore double-acting cylinder pushes 402.2 N and pulls 345.6 N at 0.5 MPa. At 0.7 MPa, it pushes 563 N and pulls 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. It uses a 1/4 inch air port and operates at speeds between 30-800 mm/s.
The MF body is shorter than an ISO 6432 cylinder but does not conform to that standard. The -S magnet allows CMSG, DMSG, or EMSG switches for sensing. It features fixed TPU bumper pads that decelerate the stroke end; it does not have an adjustable air cushion. For adjustable cushioning, look at the MFC variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X110SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.