Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke600 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting JIS-standard round-body mini cylinder handles substantial work despite its compact footprint. The 600 mm stroke specified here exceeds the 500 mm standard maximum, making it a made-to-order item for applications requiring extended travel. For the same bore and stroke, the SUS304 stainless steel barrel and riveted aluminium covers result in a shorter overall body than an ISO 6432 cylinder, saving valuable mounting length in tight machinery.
The construction pairs a 1/4" air port with a 12 mm piston rod and M10x1.25 male thread. Because the piston uses a heterogeneous two-way seal with an oil-reservoir function, it maintains a lubricating film for a long service life. Fixed TPU bumper pads and a front-cover anti-impact pad soften the stroke-end impact by decelerating the motion, though they do not provide adjustable cushioning. Plan for a safe working load of roughly 241 N, which is about 60 percent of the 0.5 MPa push rating, to ensure reliable operation. Alternatively, you can expect it to lift about 20.5 kg vertically with a 2:1 safety margin.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM Is Used
Extended Transfer Push-off
Uses the 600 mm travel to push large cardboard cartons off a packaging conveyor, leveraging the 402.2 N push force at 0.5 MPa to clear heavy boxes without requiring a multi-stage mechanism.
Vertical Parts Elevator
Lifts components weighing up to 20.5 kg to a second-tier assembly station, where the compact JIS body length saves vertical space compared to an ISO 6432 cylinder of the same stroke.
Automated Door Actuation
Opens and closes tall sliding access doors on industrial ovens, relying on the SUS304 stainless barrel to resist mild washdown and the 1/4" port to deliver rapid actuation.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM the Right Cylinder?
When sizing this actuator, compare its 402.2 N push force at 0.5 MPa against the adjacent bores: the MF25 provides 245.3 N if your load is lighter, while the MF40 offers 628.3 N for heavier demands. Because this 600 mm travel length is a non-standard, made-to-order stroke that exceeds the 500 mm standard maximum, pay close attention to side loads. An extended 12 mm rod is susceptible to bending under lateral forces, so ensure rigid guidance and a true linear load path to prevent premature seal wear. The CM round-end back cover is included for specific rear mounting orientations.
This specific SKU lacks the -S magnet, meaning it cannot accept CMSG, DMSG, or EMSG magnetic position switches; you will need the -S variant for sensing. Furthermore, a plain double-acting cylinder drifts when air is lost or the valve is centred, as the fixed bumpers only decelerate the stroke end and act as neither a lock nor a brake. To suspend a load safely during an air failure, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM FAQ
The 32 mm bore provides a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, push increases to 563 N and pull to 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It uses a 1/4" air port and a 12 mm rod with an M10x1.25 male thread.
This SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches; you must specify the -S variant for position sensing. The CM round-end back cover allows pivot mounting, and the fixed TPU bumper pads decelerate the piston at stroke ends without acting as an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.