Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 155mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke155 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles precise 155 mm strokes in compact spaces. The riveted stainless barrel and Ø4 mm rod naturally resist mild corrosion, outperforming painted alternatives in damp or washdown settings. Fixed TPU bumper pads absorb end-of-stroke impact without offering adjustable cushioning. Equipped with an M5x0.8 port and an M4x0.7 male rod thread, it operates at speeds from 30-800 mm/s.
Because the bore is Ø10, the body incorporates standard ISO 6432 mounting dimensions, allowing a seamless drop into standard mini-cylinder brackets. The built-in -S magnet supports CMSG, DMSG and EMSG position switches for exact stroke confirmation. For practical sizing, plan for a safe working load of about 24 N, which means it can comfortably lift a 2 kg part vertically with a 2:1 safety margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA Is Used
Electronic Component Testing
Applies a precise 24 N contact force to probe PCB test points during automated functional validation.
Lightweight Package Diverting
Extends 155 mm to push small parcels weighing up to 2 kg off a sorting belt into secondary packaging chutes.
Lab Sample Ejection
Ejects plastic vials from a testing carousel using a stainless body that withstands daily chemical washdowns.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA the Right Cylinder?
When sizing this 10 mm bore unit, compare your real load against the 39.3 N push rating at 0.5 MPa. If your application demands less force, dropping down to an Ø8 bore provides 25.1 N; if you need more power, stepping up to a Ø16 bore yields 100.5 N. The CA rear pivot cover suits articulated clevis mounts, while the -S magnet ensures sensor readiness. Keep in mind that a plain double-acting cylinder drifts if air pressure drops, as the TPU bumpers only decelerate the stroke end rather than locking the load. To hold a suspended weight securely, add an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA FAQ
This double-acting cylinder delivers a push force of 39.3 N and a pull force of 33 N at 0.5 MPa. At 0.7 MPa, push is 55 N and pull is 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8.
Yes to the sensor, no to the cushion. The -S suffix means it has a built-in piston magnet ready for CMSG, DMSG or EMSG switches. However, it relies on fixed TPU bumper pads for end-of-stroke deceleration; it does not have the adjustable air cushion found on MIC variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X155SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.