Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles light actuation with a 75 mm stroke. The Ø10 mm bore uses an M5x0.8 air port and an M4x0.7 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments. Fixed TPU bumper pads absorb impact at the stroke ends, keeping the riveted body compact.
For practical sizing, plan for a safe working load of about 24 N rather than the absolute maximum, which lets you lift a 2 kg part vertically with a 2:1 safety margin. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. The rear CA pivot cover is designed specifically for clevis mounting, accommodating angular rod movement during operation.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA Is Used
Small Parts Ejection
Pushes lightweight plastic moulded parts out of a machining fixture using the 39.3 N thrust at 0.5 MPa.
Package Diverter
Actuates a small pivot arm to sort small boxes on a conveyor line, utilising the 75 mm stroke and CA clevis.
Lab Sample Routing
Shifts test tubes between processing stations in a humid analytical instrument, benefiting from the stainless build.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA the Right Cylinder?
When sizing this 39.3 N (at 0.5 MPa) unit, compare it against the smaller Ø8 bore, which provides 25.1 N of push force, and the larger Ø12 bore, which outputs 56.5 N. Choose the Ø10 if the smaller bore lacks thrust or the larger bore is physically too bulky for your envelope. The CA rear clevis cover suits pivoting linkages, while standard LB foot, FA flange and TC trunnion brackets are also available.
Remember that the fixed TPU bumpers only decelerate the piston near the end of travel; they do not function as a lock. If air pressure drops or the valve is centred, the rod will drift and drop the load. To maintain vertical position safely, install an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the MI10X75CA-S variant with the internal magnet to use magnetic sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.