Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles light actuation with ease. The Ø10 mm bore uses an M5x0.8 air port and an M4x0.7 male rod thread. Its riveted stainless barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. The built-in piston magnet (-S) supports CMSG, DMSG and EMSG switches for position sensing.
For practical sizing, plan for roughly 24 N of usable work at 0.5 MPa, which translates to lifting about 2 kg vertically with a safe 2:1 margin. The rear CA pivot clevis allows articulated mounting, while fixed TPU bumper pads absorb end-of-stroke impacts. It operates at 30-800 mm/s and conforms to ISO 6432 mounting dimensions for straightforward bracket integration.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA Is Used
Electronic Component Sorting
Pushes small electronic parts down a conveyor lane with 39.3 N of force, using the CMSG sensor to confirm the diversion stroke.
Pouch Sealing Clamp
Holds a thin film pouch steady during a heat seal cycle, where the stainless body resists mild washdown moisture between batches.
Lab Sample Ejection
Ejects lightweight plastic test tubes from a carousel using the CA pivot mount to articulate the ejection arm smoothly.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA the Right Cylinder?
When sizing this 75 mm stroke model, compare it against its neighbours: the Ø8 bore yields 25.1 N of push at 0.5 MPa, whereas stepping up to the Ø12 bore provides 56.5 N. Choose the Ø10 when you need slightly more power than the smallest option but want to keep the physical envelope minimal. Because this is a plain double-acting cylinder, the piston will drift if air pressure drops or the valve is centred; the bumpers only decelerate the stroke end and act as neither a lock nor a brake. To suspend a load safely, incorporate an external rod lock or a pilot-operated check valve into your circuit. The 75 mm stroke is well within the 200 mm standard maximum, keeping the rod bending risk low, but ensure the CA clevis is aligned to prevent side loading.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA FAQ
This Ø10 mm bore cylinder features an M5x0.8 air port. It generates 39.3 N push and 33 N pull at 0.5 MPa, increasing to 55 N push and 46.1 N pull at 0.7 MPa. The theoretical maximum force is 8 kgf at 1.0 MPa.
It can lift about 2 kg vertically with a 2:1 safety margin at 0.5 MPa. However, it does not hold position on air loss; the piston drifts. You must add an external rod lock or pilot check valve for secure load holding, as the fixed TPU bumpers only decelerate the stroke end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.