Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA is a genuine double acting round-body mini air cylinder with a Ø12mm bore and 160mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ12 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA
Generating 56.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation tasks with ease. The Ø12 mm bore operates on an M5x0.8 port, while the CA back cover provides a built-in pivot clevis for articulated rod-end loading. Because the 160 mm stroke sits well within the 250 mm standard limit, it offers a reliable reach without requiring made-to-order lead times.
The riveted stainless barrel and rod shrug off mild corrosion, outperforming painted alternatives in damp environments. Its end-of-stroke impacts are softened by fixed TPU bumper pads rather than adjustable cushions. Plan for a real work rate of roughly 34 N, which translates to lifting about 2.9 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without upgrading to the -S variant.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø12 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 12 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA Is Used
Textile Loom Threading
Articulated CA clevis accommodates swing mechanics while the 56.5 N push force drives yarn guides through a 160 mm reach.
Package Deflector Arm
Stainless build withstands humid washdown zones, deflecting light cartons on a packaging line without corroding.
Lab Sample Ejection
Delivers a precise 160 mm stroke to push test tubes from a carousel, relying on fixed TPU pads to minimize end-impact noise.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA the Right Cylinder?
When sizing this 56.5 N (at 0.5 MPa) unit, consider stepping down to the Ø8 bore if your load requires only 25.1 N, or moving up to the Ø16 bore for 100.5 N of push. The CA rear clevis mount pairs naturally with pivot brackets, but remember that venting the air supply or centering the directional valve will cause the piston to drift; the bumpers only decelerate the end of travel and do not function as a locking brake. For suspended loads, integrate an external pilot check valve or rod lock. Additionally, the 160 mm stroke demands attention to side loading—ensure adequate guide bearings to prevent rod bending over the extended length.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA FAQ
This double-acting cylinder features an M5x0.8 port and a Ø6 mm piston rod with an M6x1.0 male thread. It generates 56.5 N push and 42.4 N pull at 0.5 MPa, increasing to 79.1 N push and 59.4 N pull at 0.7 MPa, with a theoretical maximum of 11.5 kgf at 1.0 MPa.
The Ø12 mm bore adheres to ISO 6432 mounting dimensions, allowing it to drop into standard mini-cylinder brackets and clevises. However, because this specific SKU lacks the -S magnet option, it cannot support CMSG, DMSG, or EMSG magnetic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI12X160CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.