Airtac MKJ Adjustable Cylinder MKJ10X15-10
The AirTAC Airtac MKJ Adjustable Cylinder MKJ10X15-10 is a genuine MK multi-mount cylinder (adjustable stroke), 10 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 39.3 N of push force at 0.5 MPa. A bumper cushions the impact. As an MK unit a fixed rod stops the piston rod rotating.
- TypeMulti-mount, adjustable stroke
- SeriesMK (no-rotating)
- Bore10 mm
- Push thrust @0.5 MPa39.3 N
- Operating pressure0.2 - 1.0 MPa (28 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MKJ Adjustable Cylinder MKJ10X15-10
The AirTAC MKJ is a no-rotating, adjustable-stroke multi-mount cylinder: a compact square-body air cylinder that fixes from 6 directions (front, back, left, right, top and bottom) and mounts side by side to save space. This model is double acting with a 10 mm bore, a 15 mm stroke and a 10 mm adjustable range, and its no-rotating plate and fixed rod stop the piston rod from turning. At 0.5 MPa the 10 mm bore delivers a theoretical push thrust of 39.3 N for light-duty work, with a bumper as the cushion.
This is a genuine AirTAC part. MK is the no-rotating multi-mount family, while the standard MD family allows rod rotation. This SKU is listed without a magnet (no trailing S); magnet versions are available if you need switch detection. We confirm overall dimensions for this stroke and any sizing questions from the datasheet on request.
Airtac MKJ Adjustable Cylinder MKJ10X15-10 Technical Specifications
| Model | Airtac MKJ Adjustable Cylinder MKJ10X15-10 |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MK (no-rotating) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 39.3 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (28 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 10 mm bore gives a theoretical push thrust of 39.3 N at 0.5 MPa (pull side lower); select a larger bore if you need more force. Pick MKJ over standard MD when rotation must be prevented: the MK no-rotating plate and fixed rod hold the rod orientation, while MD lets it turn. This variant adds a 10 mm adjustable range on top of the 15 mm stroke, and bore 10 double-acting strokes run up to 35 mm, so avoid stretching past what the short cover is designed for.
The acting type is double acting; single push, single pull and double rod are separate variants. This SKU has no magnet (no S). Port thread is PT as standard, with G available. Ask us to check side load and dimensions against the datasheet.
Applications
Indexing stopper
Use the non-rotating rod as a stop or pusher in an indexing fixture, where the plate must stay square to the part on every cycle.
Machine gate actuation
Mount the compact body directly to machine frames from any of 6 directions to drive a small sliding gate or interlock flap in tight spaces.
Pick-and-place ejection
Fit cylinders side by side to eject or lift small parts at a pick point, with the no-rotating rod keeping the part presentation consistent.
FAQ
How do I choose between MKJ and a standard MD multi-mount cylinder?
Choose MKJ when the rod must not rotate: the MK family adds a no-rotating plate, brass bushing and fixed rod that stop the rod turning. Standard MD is the same compact multi-mount body but allows rotation. Both are double acting in this variant, and MKJ adds an adjustable-stroke range on top of the fixed stroke.
Is a magnet included on this model?
No. MKJ10X15-10 has no trailing S, so it is supplied without a magnet; the magnet is an option, not a standard feature. Order the S version (for example MKJ10X15-10S) if you need position detection, and confirm sensor fitment details from the datasheet.