Airtac MKJ Adjustable Cylinder MKJ16X25-10H
The AirTAC Airtac MKJ Adjustable Cylinder MKJ16X25-10H is a genuine MK multi-mount cylinder (adjustable stroke), 16 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 100.5 N of push force at 0.5 MPa. A bumper cushions the impact. As an MK unit a fixed rod stops the piston rod rotating.
- TypeMulti-mount, adjustable stroke
- SeriesMK (no-rotating)
- Bore16 mm
- Push thrust @0.5 MPa100.5 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MKJ Adjustable Cylinder MKJ16X25-10H
The MKJ16X25-10H is an AirTAC multi-mount cylinder with a compact square body that fixes from six directions - front, back, left, right, top and bottom - and mounts side by side to save space. It is the no-rotating, adjustable-stroke MKJ build: a fixed rod and plate stop the rod turning, and the 25 mm base stroke includes a 10 mm adjustable range. Double acting on a 16 mm bore, it delivers a theoretical 100.5 N push (86.4 N pull) at 0.5 MPa, stops on a TPU bumper, and runs at 30-500 mm/s on air filtered to 40 um.
This is a genuine AirTAC part: MK family means no-rotating, unlike the standard MD square body. The SKU carries no trailing S, so it is supplied without a magnet, and with no G suffix it uses PT threads on M5x0.8 ports. It operates on 0.15-1.0 MPa (22-145 psi) at -20 to 70 C (0-150 C only with the optional high-temperature seal material). The trailing H suffix marks a build option we do not decode here - confirm the exact configuration, dimensions and sizing from the datasheet on request.
Airtac MKJ Adjustable Cylinder MKJ16X25-10H Technical Specifications
| Model | Airtac MKJ Adjustable Cylinder MKJ16X25-10H |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MK (no-rotating) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 100.5 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Start with thrust: the 16 mm bore gives a theoretical 100.5 N push at 0.5 MPa on this double acting unit, so size your load under that figure. MKJ means no-rotating (MK family) with adjustable stroke, versus the standard MDJ where rotation is allowed. The 25 mm stroke sits within the bore 16 table (up to 50 mm) plus a 10 mm adjustable range - avoid stretching to an over-long stroke on this short-cover body. No S in the code means no magnet; add the S suffix if you need switch detection. No G means PT threads, with a G-thread option by suffix change. Have us confirm what the H suffix build includes and any side-load limits from the datasheet.
Applications
Lateral transfer station
Pushes parts sideways between tracks where the no-rotating plate keeps the pusher aligned and the adjustable range sets the transfer distance.
Machine sliding-door actuator
Opens and closes a small guard or slide on a compact machine, with six-direction fixing letting the body bolt flush against the frame side.
Bench-top test rig positioning
Positions samples or probes on a laboratory bench rig, using the prevented rod rotation to keep the probe orientation fixed stroke after stroke.
FAQ
What is different about the MKJ16X25-10H compared with the plain MKJ16X25-10?
The cylinder itself decodes the same way: MK no-rotating, double acting, 16 mm bore, 25 mm stroke with a 10 mm adjustable range, no magnet (no S) and PT threads (no G). The trailing H suffix marks an additional build option that is not part of the standard decode, so we confirm exactly what it includes from the datasheet before you order.
Where does the six-direction mounting pay off?
You can fix the square body from front, back, left, right, top or bottom, so the same cylinder bolts to a plate face, a rail side or a machine ceiling without adaptors, and several units sit side by side for multi-point tooling. Exact dimensions depend on the stroke, so pull the mounting pattern from the datasheet or ask us.