Airtac MKJ Adjustable Cylinder MKJ32X10-10S
The AirTAC Airtac MKJ Adjustable Cylinder MKJ32X10-10S is a genuine MK multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact. As an MK unit a fixed rod stops the piston rod rotating.
- TypeMulti-mount, adjustable stroke
- SeriesMK (no-rotating)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MKJ Adjustable Cylinder MKJ32X10-10S
The MKJ32X10-10S is an AirTAC MKJ no-rotating multi-mount cylinder: a compact square-body double-acting cylinder that can be fixed from 6 directions (front, back, left, right, top and bottom) and mounted side by side to save space, with magnetic-switch slots around the body and high guide precision without added lubrication. Its 32 mm bore delivers a theoretical 402.1 N push at 0.5 MPa, so the short 10 mm stroke (plus a 10 mm adjustable range) suits tight, high-force jobs such as clamping or stopping parts, cushioned by a bumper.
This is a genuine AirTAC part from the MK family, where a no-rotating plate, brass bushing and fixed rod stop the piston rod from turning - unlike the standard MD family. The trailing S in the SKU means this model comes WITH a magnet for switch detection; models without S are supplied without. We confirm exact dimensions and sizing from the datasheet on request.
Airtac MKJ Adjustable Cylinder MKJ32X10-10S Technical Specifications
| Model | Airtac MKJ Adjustable Cylinder MKJ32X10-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MK (no-rotating) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the 32 mm bore when you need the largest thrust in the range: 402.1 N push (345.6 N pull) at 0.5 MPa, double acting, within an operating pressure of 0.15-1.0 MPa (22-145 psi). Pick MKJ over MD when the rod must not rotate; MD is the standard family where rotation is allowed. The MKJ adjustable-stroke design adds a 10 mm adjustable range on top of the 10 mm base stroke, letting you fine-tune the effective stroke at setup.
This base stroke of 10 mm sits well inside the bore 32 double-acting table (up to 60 mm), but keep the stroke short relative to the cover - over-long strokes on a compact body are best avoided, and side-load limits should be confirmed with us. The trailing S means this SKU includes the magnet; order the non-S code if you do not need switching. Ports are 1/8" with PT thread; a G-thread version is available under a separate code.
Applications
Conveyor gate stopper
Extend a fixed, non-rotating plate to stop or divert parts on a conveyor line, with the 10 mm adjustable range letting you dial in the exact stop position at the line.
Small-parts clamp fixture
Clamp brackets or terminals in an assembly fixture using the 32 mm bore's 402.1 N push at 0.5 MPa, with the body bolted from any of 6 directions in tight tooling plates.
Pick-and-place press fit
Hold a gripper or press pad square with the no-rotating rod while the adjustable stroke trims the press depth for small insert or snap-fit operations.
FAQ
What does the -10 at the end of MKJ32X10-10S mean?
MKJ is the adjustable-stroke variant. The code decodes as MKJ (no-rotating, double acting, adjustable) + 32 mm bore + 10 mm base stroke + 10 mm adjustable range. The trailing S means the cylinder comes WITH a magnet; without S it is supplied without one. Blank thread means PT; G is the alternative.
How do I mount this cylinder and where do I find its dimensions?
The square body can be fixed from 6 directions (front, back, left, right, top and bottom) and cylinders mount side by side to save space. Overall dimensions depend on the stroke, and allowable side-load is not a published figure here, so confirm both from the datasheet or ask us before designing the fixture.