Airtac MKJ Adjustable Cylinder MKJ32X15-10
The AirTAC Airtac MKJ Adjustable Cylinder MKJ32X15-10 is a genuine MK multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact. As an MK unit a fixed rod stops the piston rod rotating.
- TypeMulti-mount, adjustable stroke
- SeriesMK (no-rotating)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MKJ Adjustable Cylinder MKJ32X15-10
The MKJ32X15-10 is an AirTAC MKJ no-rotating multi-mount cylinder: a compact square-body double-acting cylinder that can be fixed from 6 directions (front, back, left, right, top and bottom) and mounted side by side to save space, with magnetic-switch slots around the body and high guide precision without added lubrication. Its 32 mm bore delivers a theoretical 402.1 N push at 0.5 MPa, so the short 15 mm stroke (plus a 10 mm adjustable range) suits tight, high-force jobs, cushioned by a bumper.
This is a genuine AirTAC part from the MK family, where a no-rotating plate, brass bushing and fixed rod stop the piston rod from turning - unlike the standard MD family. This SKU carries no trailing S, so it is supplied WITHOUT a magnet; add the S version if you need switch detection. We confirm exact dimensions and sizing from the datasheet on request.
Airtac MKJ Adjustable Cylinder MKJ32X15-10 Technical Specifications
| Model | Airtac MKJ Adjustable Cylinder MKJ32X15-10 |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MK (no-rotating) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the 32 mm bore when you need the largest thrust in the range: 402.1 N push (345.6 N pull) at 0.5 MPa, double acting, within an operating pressure of 0.15-1.0 MPa (22-145 psi). Pick MKJ over MD when the rod must not rotate; MD is the standard family where rotation is allowed. The MKJ adjustable-stroke design adds a 10 mm adjustable range on top of the 15 mm base stroke, letting you fine-tune the effective stroke at setup.
This base stroke of 15 mm sits well inside the bore 32 double-acting table (up to 60 mm), but keep the stroke short relative to the cover - over-long strokes on a compact body are best avoided, and side-load limits should be confirmed with us. Because this SKU has no trailing S, it comes without the magnet; use the -10S code if you need position switching. Ports are 1/8" with PT thread; a G-thread version is available under a separate code.
Applications
Jig positioning in weld cells
Position and hold welded brackets against a jig stop with a rod that never rotates, adjusting the effective stroke to suit different part heights.
Small-parts ejection
Eject finished small parts from a nest using the 32 mm bore's 402.1 N push at 0.5 MPa, with the cylinder fixed from whichever of the 6 mounting directions suits the die.
Indexing unit lockout
Lock or release an indexing table with a fixed, non-rotating plunger, using the 10 mm adjustable range to set the engagement depth precisely.
FAQ
Does MKJ32X15-10 come with a magnet for position switches?
No. The absence of a trailing S means this SKU is supplied WITHOUT a magnet. If you need magnetic piston detection for switch slots, order the MKJ32X15-10S instead. The magnet is an option, never a standard feature.
How does the adjustable stroke work and is there a stroke limit?
The MKJ design adds a 10 mm adjustable range on top of the 15 mm base stroke, so you can shorten or fine-tune the effective stroke at setup. Keep the base stroke short relative to the cover - an over-long stroke on a compact body is not recommended - and confirm exact dimensions and side-load capability from the datasheet with us.