Airtac MKJ Adjustable Cylinder MKJ32X30-10
The AirTAC Airtac MKJ Adjustable Cylinder MKJ32X30-10 is a genuine MK multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact. As an MK unit a fixed rod stops the piston rod rotating.
- TypeMulti-mount, adjustable stroke
- SeriesMK (no-rotating)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MKJ Adjustable Cylinder MKJ32X30-10
The AirTAC MKJ32X30-10 is a compact, square-body multi-mount cylinder that can be fixed from 6 directions (front, back, left, right, top and bottom) and mounted side by side to save space, with magnetic-switch slots machined around the body. This 32 mm bore, 30 mm stroke adjustable-stroke version is double acting and no-rotating: a fixed rod and plate keep the piston rod from turning, so an attached plate or tool keeps its orientation. At 0.5 MPa it delivers a theoretical push thrust of 402.1 N, and it is cushioned by a bumper.
This is a genuine AirTAC part. The MKJ variant is the adjustable-stroke member of the no-rotating MK family, adding a 10 mm adjustable range on top of the 30 mm stroke. This SKU carries no magnet. We are happy to confirm dimensions and sizing from the datasheet on request.
Airtac MKJ Adjustable Cylinder MKJ32X30-10 Technical Specifications
| Model | Airtac MKJ Adjustable Cylinder MKJ32X30-10 |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MK (no-rotating) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the 32 mm bore when you need the highest thrust in the range: 402.1 N push (345.6 N pull) at 0.5 MPa. Pick MK rather than MD when rod rotation must be prevented; pick MD when some rotation is acceptable and you want the standard version. MKJ is double acting with an adjustable stroke: this model gives 30 mm of stroke plus a 10 mm adjustable range. Strokes for this bore run up to 60 mm, but note that the covers are short, so an over-long stroke is best avoided; route any side-load questions to us. This SKU has no magnet (choose an S suffix if you need one) and PT thread; G thread is available.
Applications
Anti-rotation pick-and-place
The no-rotating rod keeps a gripped part facing the same way through each vertical pick-and-place cycle, while the compact body fits tight machine spacing.
Conveyor stopper gate
Mounted top or side on a conveyor line, the cylinder raises and lowers a stopper blade; the fixed rod prevents the blade twisting under repeated stops.
Small-parts clamping
Bolted side by side in a fixture, the 402.1 N push at 0.5 MPa clamps small workpieces, and the adjustable stroke dials in the clamp travel.
FAQ
What does the -10 at the end of MKJ32X30-10 mean?
MKJ is the adjustable-stroke variant of the MK no-rotating family. The code reads as a 32 mm bore, 30 mm base stroke, with a 10 mm adjustable range added on top. Trailing S would indicate a built-in magnet; this SKU has none, and the thread is PT (G is optional).
How do I mount this cylinder, and where do I find exact dimensions?
The square body can be fixed from 6 directions (front, back, left, right, top and bottom), so units can sit side by side to save space. Exact dimensions depend on the stroke, so please confirm them from the datasheet, and contact us about any side-load the application may impose.