Airtac PB Pen-type Cylinder PB10X75CB
The AirTAC Airtac PB Pen-type Cylinder PB10X75CB is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 75mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X75CB
The AirTAC PB10X75CB is a JIS pen-size double-acting single-rod mini cylinder engineered for compact, high-frequency small-part motion. It features a SUS304 stainless steel slim round barrel and piston rod, offering excellent durability in damp or mildly corrosive environments. Generating 39.3 N of push force at 0.5 MPa, it integrates an M5x0.8 air port and an M8x1.0 rod-end thread for straightforward load coupling.
This 10 mm bore, 75 mm stroke variant includes a CB double clevis back cover, allowing the body to pivot smoothly on a pin mount. The end caps house fixed TPU bumpers that absorb impact during the final few millimeters of travel. Because the rod is only 4 mm thick, you should maintain coaxial alignment and avoid side loading to prevent bending over the extended stroke.
Airtac PB Pen-type Cylinder PB10X75CB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X75CB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X75CB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X75CB Is Used
PCB Depaneling Router
Actuates a pivoting cutting head arm to singulate circuit boards, utilizing the CB clevis to accommodate the swing while the stainless body resists flux residue.
Pouch Sealing Clamp
Provides a 39.3 N extend thrust at 0.5 MPa to hold flexible packaging materials flat against a heated sealing bar during the thermal bonding cycle.
Sorting Diverter Arm
Pushes lightweight plastic bottles or cartons off a main conveyor belt, with the 75 mm stroke providing enough reach to clear the adjacent lane.
Is the Airtac PB Pen-type Cylinder PB10X75CB the Right Cylinder?
When sizing this actuator, note the PB6X75 offers a smaller 14.2 N push at 0.5 MPa, while the PB12X75 steps up to 56.5 N if you need more authority. For the PB10X75CB specifically, plan for a safe working load of about 24 N (roughly 60 percent of the 0.5 MPa theoretical force) to account for seal friction. This equates to lifting about 2 kg vertically with a sane 2:1 safety margin. Confirm your ordering essentials: 10 mm bore, 75 mm stroke, M5x0.8 port, CB double clevis, and no sensor magnet.
A plain double-acting cylinder like this will not hold its position if air pressure drops or the valve is centered; the piston drifts, and the fixed bumpers only decelerate near stroke end rather than locking the load. If your application requires fail-safe holding, you must add an external stop or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X75CB FAQ
This 10 mm bore double-acting cylinder delivers 39.3 N push and 33 N pull at 0.5 MPa, with maximums of 55 N push and 46.2 N pull at 0.7 MPa. The operating pressure range is 0.15-0.7 MPa, the proof pressure is 1.2 MPa, and the speed range is 50-800 mm/s.
The CB designation indicates a double clevis back cover that allows the cylinder body to pivot during operation. End-of-stroke deceleration is handled by fixed TPU bumpers rather than adjustable air cushions; for higher cycle speeds with heavy tooling mass, meter-out the exhaust or add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X75CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.