Airtac SGC Standard Cylinder SGC125X45
The AirTAC Airtac SGC Standard Cylinder SGC125X45 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke45 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC125X45
Delivering 6136 N of push force at 0.5 MPa, this large-bore double-acting cylinder handles heavy short-stroke automation tasks. The aluminium barrel is clamped by four steel tie rods for high rigidity, while the two-way piston seal maintains an internal oil reservoir to ensure long service life. Plan for about 3682 N of real work at 0.5 MPa, which equates to lifting roughly 313 kg vertically with a 2:1 safety margin.
Built to the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures and shares standard accessory dimensions. The bore dictates a G1/2 air port and an M27x2.0 rod thread. This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG position switches; choose the -S variant if sensing is required.
Airtac SGC Standard Cylinder SGC125X45 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X45 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X45
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X45 Is Used
Stamping Press Ejection
Uses the 6136 N push force to knock heavy stamped metal panels out of a die within a tight 45 mm travel.
Pallet Flap Folding
Folds corrugated cardboard flaps on large industrial pallets prior to strapping, leveraging the short stroke.
Heavy Clamp Actuation
Secures thick steel plates during welding by applying over 3600 N of safe working clamping force.
Is the Airtac SGC Standard Cylinder SGC125X45 the Right Cylinder?
For a 125 mm bore, the SGC series does not offer a smaller size, so if 6136 N at 0.5 MPa is excessive, consider an SGC160X45 which provides 10053 N if you need to step up. The 45 mm stroke is well below the 500 mm threshold, so side-load risks are minimal. Note that a plain cylinder drifts when air is lost or a valve is centred; the adjustable 40 mm air cushions only decelerate the piston near the end of travel, so add an external rod lock or pilot-operated check valve if the load must be held.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X45 FAQ
At 0.5 MPa it provides 6136 N push and 5734 N pull. At 0.7 MPa it provides 8590 N push and 8028 N pull. The theoretical maximum force is 1251 kgf at 1.0 MPa, and the air port size is G1/2.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop into standard LB, FA, FB, CA, CB or TC mounting setups. The tie-rod build adds rigidity for large-bore thrust loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X45
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.