Airtac SGC Standard Cylinder SGC160X130
The AirTAC Airtac SGC Standard Cylinder SGC160X130 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X130
Delivering 10053 N of push force at 0.5 MPa, this 160 mm bore tie-rod actuator handles heavy-duty automation with confidence. It features a G3/4 air port, an M36x2.0 rod thread, and a 130 mm stroke, operating smoothly across a 30-500 mm/s speed range.
Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity under large-bore thrust, while the two-way piston seal maintains an internal oil reservoir for long service life. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For practical sizing, plan for about 6032 N of real work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin.
Airtac SGC Standard Cylinder SGC160X130 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X130 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X130
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X130 Is Used
Automotive Press Die Handling
Provides the 10053 N push force required to lift and position heavy stamping dies within an assembly cell.
Pallet Dispenser Mechanism
Uses the 130 mm stroke to separate and feed empty pallets into a high-throughput packaging conveyor line.
Heavy-Duty Riveting Station
Applies consistent 0.7 MPa thrust for securing thick steel structural components in fabrication jigs.
Is the Airtac SGC Standard Cylinder SGC160X130 the Right Cylinder?
When sizing this 160 mm bore unit, note the adjacent SGC options: the 125 mm bore yields 6136 N of push at 0.5 MPa, while the 200 mm bore steps up to 15708 N. Choose this model when your application demands the 10053 N output. Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered, as the adjustable air cushion only decelerates the piston near stroke end rather than locking it; utilize an external rod lock or pilot-operated check valve for secure load holding. Mounting options include LB foot, FA/FB flange, CA/CB clevis, and TC trunnion styles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X130 FAQ
The SGC160X130 features a G3/4 air port and delivers 10053 N push / 9425 N pull at 0.5 MPa, 14074 N push / 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop into standard large-bore fixtures. However, because this SKU lacks the -S magnet, it cannot support CMSG, DMSG, or EMSG magnetic switches without upgrading to the magnet-equipped variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.