Airtac SGC Standard Cylinder SGC160X1400S
The AirTAC Airtac SGC Standard Cylinder SGC160X1400S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 1400mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke1400 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X1400S
Delivering 10053 N of push force at 0.5 MPa, this double-acting 160 mm bore tie-rod cylinder handles heavy-duty linear motion over its 1400 mm stroke. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity under large-bore thrust, while the two-way piston seal maintains an internal oil reservoir for long service life. Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures. Equipped with a G3/4 port and an M36x2.0 rod thread, it carries a built-in magnet for position sensing.
For practical sizing, plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin. The included -S magnet enables CMSG, DMSG or EMSG switches for end-of-stroke detection. Standard TPU seals handle temperatures from -20 to +70 C, with Viton H available for 0-150 C high-temperature environments.
Airtac SGC Standard Cylinder SGC160X1400S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X1400S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 1400 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X1400S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X1400S Is Used
Automotive Press Loading
Pushes heavy stamping blanks into a press bed over the 1400 mm travel, utilizing the 10053 N push force to move heavy steel sheets reliably.
Pallet Dispenser Pusher
Extracts empty pallets from a vertical magazine, requiring the extended stroke and robust tie-rod construction to handle the long reach and high cycle counts.
Heavy Log Transfer
Actuates a large transfer arm in a sawmill to push logs onto an outfeed conveyor, depending on the 512 kg vertical lift equivalent for gravity-assisted loading.
Is the Airtac SGC Standard Cylinder SGC160X1400S the Right Cylinder?
When sizing this actuator, compare it against its neighbors: the smaller 125 mm bore yields 6136 N push at 0.5 MPa, while the larger 200 mm bore provides 15708 N. This 160 mm model fits applications needing around 10053 N. Because the 1400 mm stroke creates a long lever arm, you must use external guides to prevent rod bending and side-load damage. Additionally, a plain cylinder drifts when air is lost or the valve is centered; the air cushion only decelerates the piston near stroke end. To hold a load securely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X1400S FAQ
This 160 mm bore model uses a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in piston magnet compatible with CMSG, DMSG and EMSG switches. The standardized ISO 15552 mounting interface ensures dimensional interchangeability, allowing you to reuse existing large-bore fixtures and accessories without redesigning the mounting footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X1400S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.