Airtac SGC Standard Cylinder SGC160X190TC
The AirTAC Airtac SGC Standard Cylinder SGC160X190TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 190mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke190 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X190TC
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy-duty automation with ease. Four steel tie rods clamp the aluminium barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for extended service life. Plan for about 6032 N of actual work output, which safely lifts roughly 512 kg vertically with a 2:1 margin.
The Ø160 mm bore features a G3/4 air port, an M36x2.0 rod thread, and 50 mm adjustable air cushions at both ends to absorb kinetic energy. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. The integral TC trunnion mount utilizes standard ISO 15552 interface dimensions, allowing direct integration into existing heavy-machinery fixtures.
Airtac SGC Standard Cylinder SGC160X190TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X190TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X190TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X190TC Is Used
Press Die Ejection
Provides the robust 10053 N push required to eject heavy stamped metal parts from large press dies.
Pallet Diverting
Uses the TC trunnion mount to pivot and divert heavy pallets along high-throughput packaging conveyors.
Lift Gate Actuation
Raises and lowers industrial loading dock lift gates, safely moving loads up to the 512 kg vertical threshold.
Is the Airtac SGC Standard Cylinder SGC160X190TC the Right Cylinder?
When sizing this 160 mm bore actuator, compare its 10053 N output at 0.5 MPa against the smaller Ø125 bore (6136 N) and the larger Ø200 bore (15708 N) to match your exact load. The 190 mm stroke keeps the rod compact, minimizing bending moments compared to longer travels. For vertical installations, remember that venting air or centering the valve causes the piston to drift; the end cushions only decelerate the stroke and do not act as a brake. An external rod lock or pilot-operated check valve is required to hold a suspended load safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X190TC FAQ
This Ø160 mm bore cylinder features a G3/4 air port and delivers 10053 N push / 9425 N pull at 0.5 MPa, 14074 N push / 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for position sensing, though the standard ISO 15552 mounting interface supports TC trunnion, LB foot, and FA flange accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X190TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.