Airtac SGC Standard Cylinder SGC160X240S
The AirTAC Airtac SGC Standard Cylinder SGC160X240S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 240mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke240 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X240S
Delivering 10053 N of push force at 0.5 MPa, this double-acting large-bore cylinder brings serious thrust to heavy industrial automation. The SGC160X240S features a 160 mm bore, a 240 mm stroke, and a built-in magnet for position sensing. Four steel tie rods clamp the aluminum barrel to the front and rear covers, ensuring high rigidity under large-bore thrust, while the two-way piston seal maintains an internal oil reservoir for long service life. A G3/4 port supplies air, and the standardized ISO 15552 mounting interface ensures it drops directly into existing large-bore fixtures.
Because the -S suffix denotes a piston magnet, you can mount CMSG, DMSG, or EMSG switches along the body for electronic or reed sensing. Plan for roughly 6032 N of real work at 0.5 MPa, which means it lifts about 512 kg vertically with a 2:1 safety margin. The default TPU seals handle temperatures from -20 to +70 C, though a Viton H option extends this to 0-150 C for high-heat environments.
Airtac SGC Standard Cylinder SGC160X240S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X240S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X240S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X240S Is Used
Injection Mold Clamping
Provides the 10053 N of push force at 0.5 MPa required to secure heavy injection molding halves during the resin injection cycle.
Pallet Stopper Gate
Uses the 240 mm stroke to raise and lower a heavy physical stop gate on high-throughput conveyor lines, handling the impact of incoming pallets.
Automated Guided Vehicle Lift
Raises the fork carriage on an AGV, safely lifting roughly 512 kg of payload vertically thanks to the robust tie-rod construction.
Is the Airtac SGC Standard Cylinder SGC160X240S the Right Cylinder?
When sizing this 160 mm bore model, consider the neighboring SGC series options. If you need less force, the 125 mm bore provides 6136 N of push at 0.5 MPa; if your application requires more power, stepping up to the 200 mm bore yields 15708 N. This 240 mm stroke falls well under the 1500 mm maximum, keeping the rod highly stable without requiring external guide rails. The included magnet (-S) is essential if your sequence requires CMSG, DMSG, or EMSG sensors for end-of-stroke confirmation.
Remember that the adjustable 50 mm air cushions at both ends only decelerate the piston near the stroke limits to prevent end-cap impact; they do not function as a brake. If your machinery loses air pressure or the valve centers, the piston will drift, and a suspended load will fall. To secure a vertical load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X240S FAQ
This 160 mm bore cylinder uses a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it fits standard FA, FB, LB, and TC mounts. The -S suffix means it has a built-in magnet, allowing you to attach CMSG, DMSG, or EMSG sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X240S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.