Airtac SGC Standard Cylinder SGC160X40
The AirTAC Airtac SGC Standard Cylinder SGC160X40 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 40mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke40 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X40
Delivering 10053 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminium barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long mechanical life. Plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin.
The unit operates at 30-500 mm/s and uses a G3/4 air port with an M36x2.0 rod thread. Because this specific SKU lacks the -S magnet option, it cannot accept CMSG, DMSG or EMSG magnetic switches. Standard TPU seals handle temperatures from -20 to +70 C, though Viton H variants can extend this to 150 C.
Airtac SGC Standard Cylinder SGC160X40 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X40 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X40
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X40 Is Used
Press Fit Assembly
Drives bearings into heavy housings using the 10053 N push force available at 0.5 MPa.
Pallet Stopper
Acts as a robust end-stop for heavy pallets on roller conveyors via its rigid tie-rod frame.
Gate Actuation
Opens and closes heavy bulk-material chute gates where a short 40 mm stroke is sufficient.
Is the Airtac SGC Standard Cylinder SGC160X40 the Right Cylinder?
When sizing this 160 mm bore, compare it against the smaller SGC125 (8590 N push at 0.7 MPa) or the larger SGC200 (21991 N push at 0.7 MPa) to match your exact load. The 40 mm stroke keeps the retracted length highly compact, minimizing side-load risks. Remember that air cushions only decelerate the piston near the stroke ends; they do not function as a lock. If your application must hold a load vertically during air loss or valve centering, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X40 FAQ
At 0.5 MPa it provides 10053 N push and 9425 N pull. At 0.7 MPa it provides 14074 N push and 13194 N pull. The theoretical maximum force is 2050 kgf at 1.0 MPa. The air port is G3/4.
No, this specific SKU does not include a magnet. You must select the -S variant to use CMSG, DMSG or EMSG switches. The design is dimensionally interchangeable per the ISO 15552 mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.