Airtac SGC Standard Cylinder SGC160X700S
The AirTAC Airtac SGC Standard Cylinder SGC160X700S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 700mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke700 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X700S
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy-duty automation with ease. Four steel tie rods clamp the aluminium barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. The built-in magnet (-S) directly supports CMSG, DMSG, and EMSG position switches.
With a 700 mm stroke and a G3/4 air port, operators should plan for roughly 6032 N of real work at 0.5 MPa, which equates to lifting about 512 kg vertically with a 2:1 safety margin. The standard TPU seal handles -20 to +70 C, though a Viton H option extends operation to 150 C for thermal-heavy environments.
Airtac SGC Standard Cylinder SGC160X700S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X700S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X700S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X700S Is Used
Automated Pallet Handling
Provides the long 700 mm reach and 512 kg vertical lift capacity required to raise and lower heavy timber pallets in automated distribution hubs.
Heavy Transfer Line Diversion
Exerts up to 14074 N at 0.7 MPa to push large metal castings cleanly across transfer lines, absorbing end-of-stroke impact via its 50 mm adjustable cushions.
Press Ejection Systems
Utilizes the -S magnet with DMSG sensors to confirm full 700 mm retraction before the main press cycle begins, ensuring safe and timed part ejection.
Is the Airtac SGC Standard Cylinder SGC160X700S the Right Cylinder?
When sizing this 160 mm bore unit, compare it against its neighbours: a 125 mm bore yields 6136 N push at 0.5 MPa, whereas stepping up to a 200 mm bore provides 15708 N. Because this SKU features a 700 mm stroke, adding external guide rails prevents rod bending and premature seal wear under large off-center loads. To hold a suspended load safely if air pressure drops, install an external rod lock or pilot-operated check valve, as the adjustable air cushion only decelerates the piston near stroke end.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X700S FAQ
This 160 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it fits standard large-bore foot, flange, and trunnion accessories. The tie-rod build adds structural rigidity, and the -S magnet enables CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.