Airtac SGC Standard Cylinder SGC160X700TC
The AirTAC Airtac SGC Standard Cylinder SGC160X700TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 700mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke700 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X700TC
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy-duty automation with ease. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while a two-way piston seal maintains an internal oil reservoir to maximize service life. Because it shares the standardized ISO 15552 mounting interface, it drops directly into existing large-bore fixtures without custom bracketry.
Equipped with a 700 mm stroke and a G3/4 port, the unit operates at speeds of 30-500 mm/s. For practical sizing, plan for about 6032 N of real work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks the -S magnet, meaning it cannot host CMSG, DMSG, or EMSG position switches.
Airtac SGC Standard Cylinder SGC160X700TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X700TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X700TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X700TC Is Used
Pallet Transfer Diversion
Pushes heavy loaded pallets onto secondary conveyor lines, utilizing the 10053 N push force to overcome friction across a 700 mm routing stroke.
Automated Warehousing Gates
Actuates large security or environmental partition doors in logistics hubs, where the TC trunnion mount accommodates the pivot arc during the 700 mm travel.
Press Tool Ejection
Ejects formed metal parts from heavy stamping presses, relying on the rigid tie-rod construction to withstand repetitive high-impact cycling.
Is the Airtac SGC Standard Cylinder SGC160X700TC the Right Cylinder?
When sizing this 160 mm bore, compare your actual load against the 10053 N push rating at 0.5 MPa. If you need less force, the smaller SGC125 bore provides 6136 N; stepping up to the SGC200 yields 15708 N for heavier demands. This model utilizes a TC trunnion mount, which pairs with the ISO 15552 interface to handle pivoting loads effectively.
Because the 700 mm stroke is quite long, provide external guide support to prevent rod bending and premature seal wear under side-loading. Furthermore, standard air cushions only decelerate the piston near the end caps and do not function as a brake; if the air supply drops, the piston will drift. Install an external rod lock or pilot-operated check valve to safely hold suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X700TC FAQ
This 160 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, so it cannot accommodate CMSG, DMSG, or EMSG magnetic switches. You would need the -S variant for sensing, though you can still use mechanical limit switches externally.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X700TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.