Airtac SGC Standard Cylinder SGC160X70S
The AirTAC Airtac SGC Standard Cylinder SGC160X70S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 70mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke70 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X70S
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy-duty automation with ease. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for extended lifespan. Plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin.
The built-in -S piston magnet allows direct mounting of CMSG, DMSG, or EMSG switches for position sensing. Fluid supply connects via the G3/4 port, and the standard TPU seal accommodates temperatures from -20 to +70 C. For high-heat environments up to 150 C, a Viton H seal option is available.
Airtac SGC Standard Cylinder SGC160X70S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X70S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X70S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X70S Is Used
Press Fit Assembly
Drives bearings into heavy machinery housings using its 6032 N safe working load to ensure precise, consistent seating.
Pallet Stopper Gate
Acts as a robust 70 mm stroke blocking mechanism in high-throughput conveyor lines, halting loaded pallets securely.
Vertical Material Lift
Raises and lowers 500 kg industrial fixtures in automated welding cells, relying on the rigid tie-rod build for stability.
Is the Airtac SGC Standard Cylinder SGC160X70S the Right Cylinder?
When sizing this 160 mm bore, verify if the 10053 N push at 0.5 MPa suits your payload, or step up to the 200 mm bore providing 15708 N for heavier demands. If your load is lighter, the 125 mm bore offers 6136 N. Because this is a 70 mm stroke, side-load risks are minimal, but always ensure axial alignment. This SKU includes the -S magnet for sensors. Remember that standard air cushions only decelerate the piston near stroke ends; to prevent drift from lost air or a centered valve, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X70S FAQ
The 160 mm bore yields a push of 10053 N and pull of 9425 N at 0.5 MPa. At 0.7 MPa, push is 14074 N and pull is 13194 N. The theoretical maximum force is 2050 kgf at 1.0 MPa. It uses a G3/4 air port.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, fitting standard large-bore fixtures and mounts. The included -S magnet supports CMSG, DMSG, and EMSG electronic or reed switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X70S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.