Airtac SGC Standard Cylinder SGC160X750FB
The AirTAC Airtac SGC Standard Cylinder SGC160X750FB is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 750mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke750 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X750FB
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy-duty positioning with ease. The four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the G3/4 port and M36x2.0 rod thread accommodate substantial airflow and mounting strength. A heterogeneous two-way piston seal maintains an internal oil reservoir for long service life.
Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 6032 N of actual work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. The standard TPU seals operate from -20 to +70 C, with Viton H available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC160X750FB Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X750FB |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X750FB
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X750FB Is Used
Automated Pallet Transfer
Provides the 10053 N push force needed to index heavy loaded pallets along a 750 mm stroke conveyor line.
Vertical Lift Station
Lifts approximately 512 kg of automotive components vertically with a 2:1 safety margin at 0.5 MPa.
Press Ejection System
Utilizes the 14074 N push force at 0.7 MPa to reliably eject formed metal parts from a large hydraulic press.
Is the Airtac SGC Standard Cylinder SGC160X750FB the Right Cylinder?
When sizing this 160 mm bore, compare your requirements against the adjacent SGC options: the smaller SGC125 provides 6136 N push at 0.5 MPa, while the larger SGC200 offers 15708 N. This SGC160X750FB includes an FB flange mounting interface, dropping easily into standard ISO 15552 fixtures. Note that a plain cylinder drifts when air is lost or the valve is centered; the adjustable 50 mm air cushions only decelerate the piston near stroke end, so install an external rod lock or pilot-operated check valve for held loads.
Because the 750 mm stroke is quite long, the 40 mm piston rod is susceptible to bending under lateral stress. Always use an external guide or rod-end support to prevent side-loading damage during full extension.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X750FB FAQ
This 160 mm bore cylinder features a G3/4 air port and delivers 10053 N push / 9425 N pull at 0.5 MPa, 14074 N push / 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface. The FB flange matches standard fixtures, and the rigid tie-rod construction handles large-bore thrust. Note that without the -S magnet, magnetic sensors cannot be used.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X750FB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.