Airtac SGC Standard Cylinder SGC160X850H
The AirTAC Airtac SGC Standard Cylinder SGC160X850H is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 850mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke850 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X850H
Delivering 10053 N of push force at 0.5 MPa, this double-acting large-bore actuator is engineered for heavy-duty automation. The SGC160X850H features a genuine ISO 15552 tie-rod build, meaning four steel rods clamp the aluminum barrel to the covers for exceptional structural rigidity. Because it uses the standardized ISO 15552 mounting interface, it drops directly into existing large-bore fixtures without custom bracketry. Equipped with a Viton H seal, it operates reliably in environments up to 150 C. Plan for roughly 6032 N of actual work at 0.5 MPa, which equates to lifting about 512 kg vertically with a 2:1 safety margin.
This specific SKU omits the magnetic piston, so it cannot host CMSG, DMSG, or EMSG switches; add the -S variant if you require position sensing. The G3/4 port and M36x2.0 rod thread supply ample flow for the 160 mm bore. A 50 mm adjustable air cushion at both ends decelerates the payload smoothly, while the two-way piston seal maintains an internal oil reservoir for prolonged operational life.
Airtac SGC Standard Cylinder SGC160X850H Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X850H |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X850H
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X850H Is Used
Hot Forge Press Ejection
Utilizes the 0-150 C Viton H seal to reliably push 10053 N when ejecting heavy forged parts from high-temperature hydraulic presses.
Palletizer Lowerator
Manages the 850 mm vertical descent of heavy unit loads, relying on the 50 mm adjustable air cushions to prevent harsh end-of-stroke impacts.
Injection Mold Separation
Clamps and separates large industrial molds using the rigid four-tie-rod construction, handling high opposing forces without barrel deflection.
Is the Airtac SGC Standard Cylinder SGC160X850H the Right Cylinder?
When sizing this 160 mm bore unit, verify your actual load requirements against its neighbors: the smaller 125 mm bore provides 6136 N push at 0.5 MPa, while the larger 200 mm bore offers 15708 N. Because this model has an 850 mm stroke, you must use an external guide or rod-end support to prevent severe side-load bending and premature seal failure. Note that a standard cylinder drifts when air is lost or the valve is centered, as the air cushion only decelerates the piston near stroke end rather than locking it; install an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X850H FAQ
This 160 mm bore cylinder features a G3/4 air port and delivers 10053 N push / 9425 N pull at 0.5 MPa, 14074 N push / 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
No, this specific SKU lacks the -S magnet option, meaning it cannot support CMSG, DMSG, or EMSG switches. You must select the -S variant if your application requires electronic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X850H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.