Airtac SGC Standard Cylinder SGC200X1050S
The AirTAC Airtac SGC Standard Cylinder SGC200X1050S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 1050mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke1050 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X1050S
Delivering 15708 N of push force at 0.5 MPa, this double-acting 200 mm bore tie-rod cylinder handles heavy-duty automation. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Plan for roughly 9425 N of real work, or about 801 kg lifted vertically with a 2:1 safety margin.
Because this SKU includes the -S magnet, it directly supports CMSG, DMSG, and EMSG position switches. The standardized ISO 15552 mounting interface ensures it drops seamlessly into existing large-bore fixtures. It features a G3/4 air port, an M36x2.0 rod thread, and adjustable air cushions at both ends to decelerate the piston smoothly.
Airtac SGC Standard Cylinder SGC200X1050S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X1050S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 1050 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X1050S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1050 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X1050S Is Used
Press Ejection Systems
Provides the robust 15708 N push force needed to eject heavy formed parts from large stamping presses over a 1050 mm reach.
Pallet Dispenser Actuation
Handles the long 1050 mm stroke required to separate and feed empty pallets into high-throughput automated packaging lines.
Heavy Gate Diverting
Shifts massive bulk-material flow gates in cement or aggregate plants, utilizing the steel tie-rod build for structural rigidity.
Is the Airtac SGC Standard Cylinder SGC200X1050S the Right Cylinder?
When sizing this 200 mm bore unit against its neighbors, stepping down to a 160 mm bore yields 10053 N of push at 0.5 MPa, while moving up to a 250 mm bore provides 24543 N. For this 1050 mm stroke, external guide rails are strongly recommended to prevent rod bending and absorb side loads during long extensions. If your application must hold a vertical load when air is removed, note that the piston will drift; the air cushion only decelerates the stroke end and does not act as a brake, so an external rod lock or pilot-operated check valve is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X1050S FAQ
This 200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it drops into standard large-bore fixtures. The -S suffix denotes a built-in piston magnet, allowing you to mount CMSG, DMSG, or EMSG electronic or reed switches along the barrel for end-of-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X1050S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.