Airtac SGC Standard Cylinder SGC200X110
The AirTAC Airtac SGC Standard Cylinder SGC200X110 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X110
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built around a genuine ISO 15552 mounting interface for seamless fixture integration. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed for heavy thrust, while a two-way piston seal maintains an internal oil reservoir for long service life.
Equipped with a G3/4 port and a 40 mm piston rod, the unit operates at 30-500 mm/s. Because this SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG sensors. Plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin.
Airtac SGC Standard Cylinder SGC200X110 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X110 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X110
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X110 Is Used
Press Tonnage
Supplies 21991 N of push force at 0.7 MPa for seating bearings and bushings in automated assembly presses.
Pallet Forming
Drives a 110 mm stroke to compress loose goods into pallet loads, utilizing the 9425 N safe working load capacity.
Mold Clamping
Secures heavy injection molds with 15079 N of pull force at 0.5 MPa, leveraging the rigid tie-rod construction.
Is the Airtac SGC Standard Cylinder SGC200X110 the Right Cylinder?
When sizing this 200 mm bore, step down to the 160 mm option (10053 N push @0.5 MPa) for lighter loads, or move up to the 250 mm bore (24543 N push @0.5 MPa) for heavier demands. If your application requires position feedback, select the -S magnet variant instead of this base model, as a plain cylinder cannot support magnetic switches.
Note that exhausting air or centering the valve will cause the piston to drift, as the air cushion only decelerates the rod near stroke end rather than locking it. To suspend a load safely during a pressure drop, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X110 FAQ
The SGC200X110 delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa. It features a G3/4 air port and a 40 mm rod with an M36x2.0 thread.
No, this specific SKU does not include the -S magnet, so it cannot support CMSG, DMSG, or EMSG switches. You must select the SGC200X110-S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.