Airtac SGC Standard Cylinder SGC200X135
The AirTAC Airtac SGC Standard Cylinder SGC200X135 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 135mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke135 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X135
Delivering 15708 N of push force at 0.5 MPa, this large-bore AirTAC actuator is built for heavy automation tasks. The SGC200X135 is a double-acting ISO 15552 tie-rod cylinder, utilizing four steel rods to clamp the aluminium barrel to the covers for maximum structural rigidity under high thrust. It features a G3/4 air port and a 50 mm adjustable air cushion at both ends to decelerate the payload smoothly.
Because this specific SKU lacks the -S suffix, it cannot accept CMSG, DMSG, or EMSG magnetic switches. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. The standard TPU seal ensures long life, while a Viton H option extends operation to 150 C.
Airtac SGC Standard Cylinder SGC200X135 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X135 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X135
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X135 Is Used
Press Die Ejection
Provides the robust 15708 N push force required to eject heavy stamped metal panels from large press dies.
Pallet Dispenser
Handles the reliable horizontal separation and feeding of loaded pallets in high-throughput packaging lines.
Injection Mould Clamp
Secures large plastic injection mould halves together, utilizing its rigid tie-rod build to resist spreading forces.
Is the Airtac SGC Standard Cylinder SGC200X135 the Right Cylinder?
When sizing this 200 mm bore unit, compare it against its neighbours: the 160 mm bore provides 10053 N of push at 0.5 MPa, while stepping up to the 250 mm bore yields 24543 N. If your application requires position feedback, select the -S magnet variant instead of this base model to enable sensor mounting. Since the 135 mm stroke is well under the 500 mm threshold, standard rod-bending concerns are minimal.
Remember that the adjustable air cushion only slows the piston near the end of travel; it does not function as a brake. If the machine loses air pressure or the valve is centred, the rod will drift, so you must incorporate an external rod lock or a pilot-operated check valve to hold a suspended load safely in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X135 FAQ
The SGC200X135 features a G3/4 air port and delivers 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, and a theoretical maximum of 3204 kgf at 1.0 MPa.
It is dimensionally interchangeable per the ISO 15552 mounting interface, but this specific SKU lacks a magnet and cannot accept CMSG/DMSG/EMSG switches. You must order the -S variant for sensing capabilities.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X135
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.