Airtac SGC Standard Cylinder SGC200X250
The AirTAC Airtac SGC Standard Cylinder SGC200X250 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 250mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke250 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X250
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder handles heavy industrial loads with ease. The Ø200 mm bore features a G3/4 air port and a robust tie-rod build, where four steel rods clamp the aluminum barrel to the covers for maximum structural rigidity. Its two-way piston seal maintains an internal oil reservoir, ensuring long operational life.
Because the theoretical maximum hits 3204 kgf at 1.0 MPa, you should plan for about 9425 N of actual work at 0.5 MPa, which safely lifts an 801 kg vertical load with a 2:1 margin. This SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches without upgrading to the magnet-equipped variant. The standardized ISO 15552 mounting interface guarantees dimensional interchangeability with existing large-bore fixtures.
Airtac SGC Standard Cylinder SGC200X250 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X250 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X250
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X250 Is Used
Automotive Press Stamping
Provides the 21991 N push force at 0.7 MPa needed to actuate heavy-duty stamping presses and form vehicle body panels.
Pallet Dispenser Ejection
Uses the 250 mm stroke to push empty pallets into high-speed packaging lines, moving weights safely within the 801 kg vertical lift limit.
Heavy Machinery Clamping
Secures large steel castings during machining operations, utilizing the rigid four-tie-rod construction to withstand severe cutting forces.
Is the Airtac SGC Standard Cylinder SGC200X250 the Right Cylinder?
When sizing this 200 mm bore model, compare it against its neighbors: the 160 mm bore provides 10053 N of push at 0.5 MPa, while the massive 250 mm bore yields 24543 N. If your application requires position feedback, select the -S magnet version to enable CMSG, DMSG, or EMSG sensors. Choose mounting hardware like LB foot brackets, FA flanges, or TC trunnions based on your load pivot requirements.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the adjustable 50 mm air cushion only decelerates the piston near stroke end rather than locking it. To suspend a load safely during an outage, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X250 FAQ
This double-acting cylinder features a 200 mm bore, a 250 mm stroke, a G3/4 port, and a 30-500 mm/s speed range. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
This specific SKU lacks the -S magnet, meaning it cannot support CMSG, DMSG, or EMSG switches without changing to the magnet variant. The ISO 15552 mounting interface ensures it drops directly into standard large-bore fixtures, and the tie-rod construction provides high rigidity for heavy loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X250
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.