Airtac SGC Standard Cylinder SGC200X250SFA
The AirTAC Airtac SGC Standard Cylinder SGC200X250SFA is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 250mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke250 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X250SFA
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore tie-rod cylinder handles heavy industrial loads with ease. The Ø200 mm bore uses a G3/4 air port and an M36x2.0 piston rod thread. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures.
Equipped with an -S piston magnet, the unit supports CMSG, DMSG, and EMSG position switches for electronic feedback. Plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. The default TPU seals operate from -20 to +70 C, though a Viton H option extends this to 0-150 C for high-temperature environments.
Airtac SGC Standard Cylinder SGC200X250SFA Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X250SFA |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X250SFA
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X250SFA Is Used
Stamping Press Feeder
Pushes heavy coil stock into a mechanical press, utilizing the 21991 N push force at 0.7 MPa to overcome material friction.
Pallet Dispenser
Indexes empty pallets into an automated packaging line, using the 250 mm stroke and FA flange mount for stable horizontal actuation.
Injection Mold Clamp
Provides auxiliary clamping pressure on large molds, relying on the rigid four tie-rod construction to resist deflection under high thrust.
Is the Airtac SGC Standard Cylinder SGC200X250SFA the Right Cylinder?
When sizing this 200 mm bore actuator, compare its 15708 N push force at 0.5 MPa against the smaller Ø160 bore (10053 N) and the larger Ø250 bore (24543 N) to match your exact requirement. The included FA flange mounting accessory bolts directly to the ISO 15552 interface, and the -S magnet enables solid state or reed sensors. Because the 250 mm stroke exceeds 500 mm, ensure external guide rails carry the load to prevent rod bending and premature seal wear. Remember that a standard cylinder drifts when air is lost or the valve is centered; the adjustable air cushion only decelerates the piston near the end of stroke. To hold a suspended load securely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X250SFA FAQ
This Ø200 mm bore cylinder features a G3/4 air port and delivers 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, allowing you to use standard foot, flange, clevis, or trunnion accessories. The included -S magnet supports CMSG, DMSG, and EMSG switches for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X250SFA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.