Airtac SGC Standard Cylinder SGC200X275TC
The AirTAC Airtac SGC Standard Cylinder SGC200X275TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 275mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke275 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X275TC
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built around a rigid tie-rod design where four steel rods clamp the aluminum barrel to the covers. The standardized ISO 15552 mounting interface ensures it drops directly into existing large-bore fixtures, and its two-way piston seal maintains an internal oil reservoir for extended operational life. The Ø200 mm bore utilizes a G3/4 air port and an M36x2.0 rod thread.
Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 9425 N of actual work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. The standard TPU seals handle -20 to +70 C, while a Viton H option extends this to 150 C.
Airtac SGC Standard Cylinder SGC200X275TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X275TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X275TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X275TC Is Used
Automotive Press Stamping
Provides the robust 15708 N push at 0.5 MPa required to actuate heavy lower-tier stamping dies and hold large panel blanks during forming operations.
Palletizer Strapping Head
Utilizes the 275 mm stroke to drive the strapping and sealing mechanism securely around heavy industrial pallet loads in high-throughput logistics hubs.
Injection Mold Ejection
Leverages the rigid four-tie-rod construction to deliver stable ejection force, reliably pushing thick-walled molded plastic components out of heavy tooling.
Is the Airtac SGC Standard Cylinder SGC200X275TC the Right Cylinder?
When sizing this 200 mm bore, compare its 15708 N push force at 0.5 MPa against the 10053 N of the smaller Ø160 bore or the 24543 N of the larger Ø250 option. The included TC trunnion mount provides a pivoting centerline axis for articulating machinery. Since this is a non-magnetized SKU, omitting the -S suffix means you must use external mechanical limit switches for end-position detection.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered; the adjustable 50 mm air cushions only decelerate the piston near stroke ends rather than locking the load. To suspend a vertical load safely, integrate an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X275TC FAQ
This Ø200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, meaning it cannot support CMSG, DMSG, or EMSG magnetic switches. You must use external mechanical sensors, though the ISO 15552 mounting interface allows easy physical integration with standard TC trunnion accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X275TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.