Airtac SGC Standard Cylinder SGC200X380S
The AirTAC Airtac SGC Standard Cylinder SGC200X380S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 380mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke380 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X380S
Delivering 15708 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy-duty automation with ease. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 9425 N of real work, or roughly 801 kg lifted vertically with a 2:1 safety margin.
The 200 mm bore features a G3/4 air port, an M36x2.0 piston rod thread, and 50 mm adjustable air cushions at both ends to absorb kinetic energy. Because this SKU includes the -S magnet, it directly supports CMSG, DMSG, and EMSG position switches. You can also specify Viton H seals if your environment reaches up to 150 C instead of the standard -20 to 70 C range.
Airtac SGC Standard Cylinder SGC200X380S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X380S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X380S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X380S Is Used
Press Die Ejection
Ejects heavy formed metal panels from stamping presses using 15708 N of thrust at 0.5 MPa, relying on the 50 mm cushions to stop the 380 mm stroke smoothly.
Pallet Dispenser Pusher
Indexes empty pallets into high-speed packaging lines, utilizing the -S magnet and DMSG switches to confirm full extension in automated PLC logic.
Injection Mold Clamp
Acts as a secondary mold locking actuator where the ISO 15552 mounting interface allows direct bolting to existing heavy machinery fixtures.
Is the Airtac SGC Standard Cylinder SGC200X380S the Right Cylinder?
When sizing this 380 mm stroke model, verify your actual load: the smaller 160 mm bore offers 10053 N push at 0.5 MPa, while the larger 250 mm bore provides 24543 N if you need more thrust. Since this is a non-locking actuator, the piston will drift if air pressure drops or the valve centers; integrate an external rod lock or pilot-operated check valve for suspended loads. Furthermore, at 380 mm of travel, guide the load externally to prevent side-loading forces from bending the 40 mm rod.
Mounting options include LB foot, FA flange, CA clevis, and TC trunnion styles, all conforming to the ISO 15552 mounting interface for fixture interchangeability. The included magnet allows seamless sensor integration without aftermarket modifications.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X380S FAQ
The 200 mm bore has a G3/4 port and generates 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, and a theoretical maximum of 3204 kgf at 1.0 MPa.
No, the piston will drift on air loss or valve centering, as the air cushions only decelerate the piston near stroke end and do not act as a brake. You must add an external rod lock or pilot-operated check valve to hold suspended loads safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X380S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.