Airtac SGC Standard Cylinder SGC200X485
The AirTAC Airtac SGC Standard Cylinder SGC200X485 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 485mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke485 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X485
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore ISO 15552 tie-rod cylinder handles heavy automation tasks. Four steel tie rods clamp the aluminium barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. The G3/4 air port and M36x2.0 rod thread match the 200 mm bore standard.
For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which safely lifts an 801 kg vertical load with a 2:1 margin. The default TPU seal operates from -20 to +70 C, with a Viton H option available for 0-150 C environments. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches.
Airtac SGC Standard Cylinder SGC200X485 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X485 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 485 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X485
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×485 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X485 Is Used
Press Fit Assembly
Drives heavy bearings into automotive transmission housings using its 15708 N thrust capacity at 0.5 MPa.
Pallet Dispenser
Separates empty pallets from a stack in high-throughput logistics lines, utilizing the 485 mm stroke to clear the magazine.
Injection Mould Clamp
Actuates secondary safety gates on large plastic injection moulding machines where rigid tie-rod construction withstands vibration.
Is the Airtac SGC Standard Cylinder SGC200X485 the Right Cylinder?
When sizing this 200 mm bore unit, note the smaller 160 mm bore yields 10053 N push, whereas the larger 250 mm bore provides 24543 N at 0.5 MPa. To match your fixture footprint, the standardized ISO 15552 mounting interface allows seamless integration with existing large-bore accessories. Choose LB foot, FA flange, or TC trunnion mounts as needed.
Since the 485 mm stroke approaches the 500 mm threshold, ensure external guide rails support the load to prevent rod bending and premature seal wear. Remember that exhausting air or centring the valve causes the piston to drift; add an external rod lock or pilot-operated check valve if the application requires suspended load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X485 FAQ
The 200 mm bore features a G3/4 air port and provides 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, and a theoretical maximum of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG or EMSG switches. You must select the -S variant for position sensing capabilities.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X485
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.