Airtac SGC Standard Cylinder SGC200X600S
The AirTAC Airtac SGC Standard Cylinder SGC200X600S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X600S
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built around a robust tie-rod architecture where four steel rods clamp the aluminum barrel to the end covers. The standardized ISO 15552 mounting interface ensures it drops directly into existing large-bore fixtures, simplifying machine upgrades and spares replacement. A two-way piston seal retains an internal oil reservoir for long-term lubrication, and the unit operates at speeds of 30-500 mm/s.
Because the code includes the -S suffix, this unit features a built-in piston magnet ready for CMSG, DMSG, or EMSG position switches. Plan for roughly 9425 N of real work at 0.5 MPa, which equates to lifting about 801 kg vertically with a 2:1 safety margin. The Ø200 mm bore utilizes a G3/4 air port, an M36x2.0 rod thread, and 50 mm adjustable air cushions at both ends to manage kinetic energy.
Airtac SGC Standard Cylinder SGC200X600S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X600S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X600S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X600S Is Used
Automotive Press Stamping
Provides the high thrust needed to form and seat heavy vehicle body panels in automated press lines.
Palletizer Transfer Arm
Utilizes the 600 mm stroke to push fully loaded pallets onto outbound conveyor rollers in distribution hubs.
Plastic Injection Mold Ejection
Delivers consistent 15708 N push force to eject large molded plastic components from heavy industrial tooling.
Is the Airtac SGC Standard Cylinder SGC200X600S the Right Cylinder?
When sizing this 200 mm bore actuator, compare your actual load against the 15708 N push rating at 0.5 MPa. If your application requires less force, the smaller SGC160 bore provides 10053 N; stepping up to the SGC250 yields 24543 N. For vertical or heavy horizontal loads, remember that a standard double-acting cylinder drifts when air is lost or the valve is centered, as the air cushion only decelerates the piston near stroke end rather than locking it. An external rod lock or pilot-operated check valve is required to hold a load safely.
With a 600 mm stroke, the Ø40 mm piston rod extends significantly, making it susceptible to bending under side loads. Ensure your mechanism provides external guidance to prevent rod deflection and premature seal wear. The default TPU seal handles temperatures from -20 to +70 C, while a Viton H option extends this range up to 150 C for high-heat environments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X600S FAQ
This Ø200 mm bore model uses a G3/4 air port and generates 15708 N push / 15079 N pull at 0.5 MPa, and 21991 N push / 21110 N pull at 0.7 MPa. The theoretical maximum force is 3204 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in magnet compatible with CMSG, DMSG, and EMSG switches. It is dimensionally interchangeable per the ISO 15552 mounting interface, and its four steel tie rods provide high structural rigidity for large-bore applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.