Airtac SGC Standard Cylinder SGC200X750SH
The AirTAC Airtac SGC Standard Cylinder SGC200X750SH is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 750mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke750 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X750SH
Delivering 15708 N of push force at 0.5 MPa, the AirTAC SGC200X750SH is a double-acting large-bore ISO 15552 tie-rod cylinder built for heavy-duty automation. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed to handle massive thrust without flexing. The two-way piston seal maintains an internal oil reservoir for continuous lubrication and extended service life. A built-in piston magnet (-S) enables direct mounting of CMSG, DMSG, or EMSG switches for position sensing.
Because this SKU includes the Viton H seal option, operating temperature extends up to 150 C for high-heat environments. The G3/4 port and 50 mm adjustable air cushions at both ends manage rapid stroke transitions. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin.
Airtac SGC Standard Cylinder SGC200X750SH Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X750SH |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X750SH
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X750SH Is Used
Automotive Body Welding
Provides the 15708 N push force required to clamp heavy chassis frames during robotic welding operations.
Pallet Transfer Diverters
Uses the 750 mm stroke to push fully loaded automotive pallets cleanly across high-speed packaging lines.
Injection Mold Ejection
Handles high-temperature mold environments up to 150 C using the Viton H seal to eject dense plastic parts.
Is the Airtac SGC Standard Cylinder SGC200X750SH the Right Cylinder?
This 200 mm bore sits between the SGC160 (10053 N push at 0.5 MPa) and the SGC250 (24543 N push at 0.5 MPa), giving you a clear upgrade path if load requirements shift. The 750 mm stroke demands careful attention to side loads; always use external guide rails to prevent rod bending and premature seal wear over such a long extension. Remember that standard air cushions only decelerate the piston near the end of travel—they do not lock the load. If the machine loses air pressure, the rod will drift, so install an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X750SH FAQ
This 200 mm bore cylinder features a G3/4 air port and delivers 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it drops into standard large-bore fixtures. The included -S magnet allows direct fitting of CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X750SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.