Airtac SGC Standard Cylinder SGC200X800
The AirTAC Airtac SGC Standard Cylinder SGC200X800 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 800mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke800 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X800
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder handles heavy-duty automation with ease. It features a robust tie-rod construction where four steel rods clamp the aluminum barrel to the covers, ensuring high rigidity under stress. The two-way piston seal retains an oil reservoir for continuous lubrication and long service life. Plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin.
Because this SKU lacks the -S suffix, it cannot accept magnetic position switches; you must add the -S variant to use CMSG, DMSG, or EMSG sensors. The unit is dimensionally interchangeable per the ISO 15552 mounting interface, dropping directly into existing large-bore fixtures. It uses a G3/4 air port, an M36x2.0 rod thread, and a 50 mm adjustable air cushion at both ends to decelerate the piston smoothly.
Airtac SGC Standard Cylinder SGC200X800 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X800 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X800
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X800 Is Used
Automotive Press Transfer
Moves heavy stamping dies across an 800 mm gap, utilizing the 15708 N push force to shuttle large panels between press stations.
Pallet Dispenser Ejection
Pushes empty or loaded pallets out of a stacking magazine, relying on the rigid tie-rod frame to maintain alignment under high lateral stress.
Injection Mold Extraction
Extracts large molded plastic parts from deep cavities, using the 50 mm adjustable air cushions to safely decelerate the 800 mm stroke.
Is the Airtac SGC Standard Cylinder SGC200X800 the Right Cylinder?
When sizing this 200 mm bore, verify if the 160 mm bore (10053 N push @0.5 MPa) is sufficient, or if you need to step up to the 250 mm bore (24543 N push @0.5 MPa) for heavier loads. Since this is an 800 mm stroke, you must use external guide rails to prevent rod bending and absorb side loads during extension. This plain cylinder will drift if air is lost or the valve is centered; the air cushion only decelerates the piston near the stroke end and acts as no brake. For suspended loads, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X800 FAQ
The SGC200X800 delivers 15708 N push and 15079 N pull at 0.5 MPa, and 21991 N push and 21110 N pull at 0.7 MPa. The theoretical maximum force is 3204 kgf at 1.0 MPa. It features a G3/4 air port and an M36x2.0 rod thread.
No, this specific SKU does not include a magnet. You must select the -S variant to use CMSG, DMSG, or EMSG magnetic switches. Additionally, its ISO 15552 mounting interface ensures it matches standard large-bore fixtures and accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.