Airtac TCL Triple Axis Cylinder TCL32X60-S
The AirTAC Airtac TCL Triple Axis Cylinder TCL32X60-S is a genuine JIS-standard guided cylinder with a Ø32mm bore and 60mm stroke on twin guide rods. Its integrated steel-ball linear bearing gives low-friction, high-precision travel — well suited to vertical lifts and high-load, high-accuracy moves, holding the tool square to ±0.05° of rotation without any external linear guide.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- BearingSteel-ball linear bearing
- Non-rotating±0.05°
- CushionRubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TCL Triple Axis Cylinder TCL32X60-S
The AirTAC TCL32X60-S is a JIS-standard double-acting guided cylinder featuring a twin-rod design with an integrated steel-ball linear bearing. A central Ø16 mm piston rod drives the unit between two guide rods, generating 402 N of push force at 0.5 MPa. The linear ball bearing ensures low-friction, high-precision travel without the stick-slip common to plain bushings, making it ideal for smooth vertical lifts.
Because the guide unit prevents rotation to a tight ±0.05° tolerance, it carries side loads and torque directly, eliminating the need for an external linear rail. Stroke kinematics end against fixed rubber TPU bumpers rather than an adjustable air cushion. The standard built-in magnet works with CS1 reed or DS1 electronic switches across four sensor slots, and 1/8" ports offer flexible plumbing from upper or side groups.
Airtac TCL Triple Axis Cylinder TCL32X60-S Technical Specifications
| Model | Airtac TCL Triple Axis Cylinder TCL32X60-S |
|---|---|
| Series | TCL JIS guided (twin-rod) cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Bearing | Steel-ball linear bearing |
| Port size | 1/8" |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Non-rotating tolerance | ±0.05° (retracted) |
| Cushion | Rubber bumper |
| Max std stroke | Up to 250 mm |
Specifications follow the official AirTAC TCL/TCM series datasheet (JIS standard). Confirm against the product label before installation. Thread options: PT (blank) / G / NPT. Every TC model ships with a built-in magnet for sensor switches.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max | 82 kgf | |
Force is set by the bore and piston rod (Ø16 mm); the twin guide rods carry side load and torque, not thrust. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac TCL Triple Axis Cylinder TCL32X60-S
| TC | Tri-rod (guided, twin-rod) cylinder, double acting. |
|---|---|
| L | Bearing: Steel-ball linear bearing (L = linear ball). |
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet (standard on TC) for a magnetic sensor switch. |
Sister type: TCM32X60 (brass sliding bearing, more impact/dust tolerant). Thread codes: blank = PT · G · T = NPT.
Where the Airtac TCL Triple Axis Cylinder TCL32X60-S Is Used
PCB Handling Lift
Lifts populated PCB trays using 402 N of push at 0.5 MPa. The steel-ball linear bearing provides friction-free vertical motion without stick-slip, while the ±0.05° non-rotating tolerance keeps the gripper square.
Pallet Diverter Gate
Stops and diverts heavy pallets on a conveyor line. The twin guide rods absorb the side load and torque of the moving mass, removing the need to mount a separate shock absorber or external guide rail.
Welding Fixture Clamp
Actuates an off-centre clamping arm on a welding fixture. The integrated guide handles the moment load securely, and the four sensor slots allow position confirmation from any facing angle.
Is the Airtac TCL Triple Axis Cylinder TCL32X60-S the Right Cylinder?
If 402 N of thrust at 0.5 MPa is more than your layout requires, the smaller Ø25 bore yields 245 N of push. For heavier pressing or lifting, stepping up to the Ø40 bore provides 628 N. Choose the sibling TCM32 series with its brass sliding bearing if your application involves high impact shocks or dusty radial loads. To replace this unit, specify bore 32, stroke 60, 1/8" ports, PT thread, and the standard S magnet.
Note that this cylinder will not hold a load vertically if air pressure drops or the valve is centered; the rod drifts, as the guide resists rotation but not gravity. For fail-safe positioning, add an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Side load / torque the guide must carry
- ✓ TCL (precision, low friction) vs TCM (impact, radial load)
- ✓ Stroke & mounting face (top / bottom / rear)
- ✓ Port/thread type (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check The guide unit takes side load & torque — but do not exceed the max safe load/torque for your stroke.
- check Mount from the top, bottom (screw or T-slot) or rear face; use the precision locating holes.
- check Do not disassemble the fixing block or guide unit — factory-set precision.
- check Fit CS1 / DS1 magnetic switches in the four sensor slots as needed.
Airtac TCL Triple Axis Cylinder TCL32X60-S FAQ
At 0.5 MPa it provides 402 N of push and 302 N of pull; at 0.7 MPa push increases to 563 N. The maximum theoretical force is 82 kgf. End-of-stroke energy is absorbed by fixed rubber TPU bumpers; there is no adjustable air cushion screw on this series.
Choose the TCL32 for high-precision, low-friction vertical lifts and smooth travel. If the application involves high impact shocks or heavily dusty radial loads, the TCM32 with its brass sliding bearing is the better choice. Both feature the standard S magnet for CS1 or DS1 sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TCL Cylinders
Request a Quote for Airtac TCL Triple Axis Cylinder TCL32X60-S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.