Airtac TN Double Axis Double Rod Cylinder TN10X70S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X70S is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
About the Airtac TN Double Axis Double Rod Cylinder TN10X70S
Two parallel rods on a shared plate let a twin-rod cylinder carry the load without rotating, resisting both bending and twisting. The TN10X70-S delivers a 10mm bore and a 70mm stroke; at 0.5 MPa the theoretical push thrust is 78.5 N, and the external bumper cushions each impact while offering 0 to -5 mm of stroke trim.
As a genuine AirTAC part it meets the enterprise standard with a typical aluminium-alloy body. Every unit ships with a magnet fitted as standard, along with switch slots around the body. We provide confirmed dimensions and sizing straight from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X70S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X70S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the bore for the thrust your job needs: the 10mm bore yields a theoretical 78.5 N push at 0.5 MPa. TN is built to the enterprise standard with PT threads only; TR adds JIS compliance, tighter non-rotating precision, and G or NPT thread choices. Keep the 70mm stroke inside the rated range for the bore; excessive strokes stress the short cover. Contact us to confirm side-load fit from the datasheet.
Applications
Alignment Plunger
Square a panel or board against a fixed fence before clamping; the twin rods hold the plunger face flat and prevent angular drift during the push.
Carton Diverter
Slide a guide flap between two packing lanes; the dual rods keep the flap straight without needing a separate linear guide rail alongside the cylinder.
Press-Fit Station
Press a small bushing or pin into a housing; the two rods share the load and keep the press head from skewing under offset force.
FAQ
Is the magnet optional on the TN series?
No. Every TN twin-rod cylinder ships with a magnet fitted as standard; there is no non-magnetic variant. Switch slots around the body accept standard AirTAC magnetic switches for position sensing.
How do I confirm dimensions and weight for my mounting?
Overall dimensions depend on the stroke and are published per model in the datasheet. We provide confirmed dimensions, weight, and side-load curves from the datasheet on request so you can verify fit before ordering.