The AirTAC GC200-06 AirTAC F.R.L. Combination, PT1/8, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC200-06 is a three-piece F.R.L. combination that conditions compressed air in one assembly: a filter that removes water and particulate through a 5 um element, a low-pressure-type regulator for setpoint control, and an oil-mist lubricator for downstream air tools and cylinders. This 200-size unit is threaded PT1/8 (1/8 in). The filter section has a manual drain and a PC (polycarbonate) bowl, the regulator carries an external round gauge with a psi scale, and a reverse/check valve is fitted. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). A mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge style and scale, thread form (PT standard, G and NPT as order options) and reverse/check valve. Flow for this series is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC200-06 AirTAC F.R.L. Combination, PT1/8, Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds spray-gun drops on a paint line where the 5 um element polishes the air, the low-pressure regulator holds a gentle setpoint for atomising, and the lubricator conditions the gun trigger valve.
Supplies carton-sealing and wrapping machines whose small air cylinders and grippers run at reduced pressure, with the manual drain cleared at shift checks and the psi gauge read at a glance.
Conditions the bench drop feeding impact drivers and die grinders, with the lubricator carrying oil mist to the tool motors and the check valve holding the circuit against backflow.
Start with the size and port: the 200 step with its PT1/8 thread suits lines built around 1/8 in connections, while larger 300/400/600 sizes serve higher-flow circuits - match the step to the air demand of the circuit rather than the fitting alone. This code fixes the real, decodable choices: a 5 um filter element (the finer grade; 40 um is the standard option), a manual drain you operate by hand, a low-pressure-type regulator for applications that work below standard setpoints, an external round gauge scaled in psi, a fitted reverse/check valve, and PT thread with G (BSPP) or NPT available to order. Note that the exact regulation range of the low-pressure type is not published in the sheet we work from, so confirm it with us. Because flow is published as curves and not as a single rated number, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow, Cv, l/min or SCFM for this unit. Send us your application details and we will confirm the datasheet flow curves and help you check whether the 200 size at PT1/8 suits your demand before you order.
The L in the code GC20006MLC2WK marks the low-pressure regulator type, intended for circuits that work below standard setpoints; the exact regulation range of the low-pressure type is not published in our sheet, so confirm it with us on request. The C2 code adds an external round gauge scaled in psi (MPa and bar scales are also available), so the setpoint can be read directly in psi without conversion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.