The AirTAC GC200-06G AirTAC F.R.L. Combination, G1/8, Manual Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator built up as one unit. This GC200-06G is size 200 with a G1/8 (1/8 in) thread, manual drain, 40 um standard filtration, a low-pressure regulator with an embedded square gauge scaled in psi, a reverse/check valve fitted, and a mounting bracket included. In service, the filter strips water and particulate from the compressed air, the regulator holds your set pressure steady, and the lubricator feeds oil mist to downstream components.
This is a genuine AirTAC part. The G-series runs in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and the catalogue options include automatic or manual drains, 5 um filtration (code W), gauge scales in MPa, psi or bar, and G or NPT threads (PT is the standard). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GC200-06G AirTAC F.R.L. Combination, G1/8, Manual Drain |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds cleaned, regulated, lubricated air to the pneumatic clamps and swing cylinders on a CNC machining fixture, where the low-pressure regulator suits circuits that hold a modest set pressure all shift.
Prepares the air supply for the pick-and-place and case-sealing cylinders on a packaging conveyor, with the 40 um filter protecting directional valves and the lubricator keeping seals and O-rings conditioned.
Serves a bench-mounted drop with impact drivers and nutrunners on an assembly line, giving operators filtered, pressure-stabilised, oil-misted air at the point of use from a single compact unit.
Size 200 with a 1/8 in port suits compact installations with modest air demand; step up to 300, 400 or 600 as flow and port size grow. Drain choice should match duty: this unit is manual drain, so someone must open the bowl drain periodically; automatic drain suits unattended lines, and differential-pressure drain is the catalogue default. Filtration is 40 um standard; specify 5 um (code W) where finer protection is needed. The square gauge on this code reads psi; MPa and bar scales are available, and an external round gauge is optional. Thread is G (BSPP) here; PT is the standard and NPT can be ordered as a specification option. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure and air demand and we will confirm sizing from the datasheet on request.
This code carries M, the manual-drain option: the bowl drain is opened periodically to expel collected condensate. If the unit will sit where nobody drains it regularly, order the automatic-drain version instead; differential-pressure drain is the catalogue default. All three drain types are catalogue options on the GC series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.