The AirTAC GC200-06L AirTAC F.R.L. Combination, G1/8, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200-06L is an AirTAC three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one set, so the air is cleaned of water and particulate, held at a set pressure, and carrying a fine oil mist before it reaches your actuators and tools. This 200-size unit is specified with a G1/8 port, a low-pressure regulator type, a 5 um filter element (the finer of the two published grades), a differential-pressure drain on the filter bowl, a round gauge reading in psi, a reverse/check valve fitted, and a mounting bracket included. The bowls on the 200 size are polycarbonate, with a sight glass on the lubricator for oil level.
This is a genuine AirTAC part. The GC series is published in 200, 300, 400 and 600 sizes with a choice of thread (PT standard, G and NPT to order), drain type, filter grade, gauge style and scale, and standard or low-pressure regulation. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Because AirTAC publishes flow only as curves rather than a single rated figure, we confirm the datasheet and flow figures for your application on request.
| Model | GC200-06L AirTAC F.R.L. Combination, G1/8, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding pilot-air and actuation supply to directional control valves on a carton-forming and sealing line, where the 5 um element protects valve spools and the low-pressure regulator holds a gentle, stable set pressure for sensitive valve actuation.
Supplying pusher and stopper cylinders along a bottle-conveyor line, with water and particulate removed before the cylinders, pressure held steady through shift-long cycling, and oil mist keeping the cylinder seals and guide surfaces lubricated.
Serving the air-actuated clamps and swing cylinders on a machining fixture, where the 5 um grade guards the clamp valve internals, the regulator holds the clamping pressure set on the psi gauge, and the reverse/check valve helps hold the circuit against backflow.
Start with size and port: the GC series steps through 200, 300, 400 and 600 with matching ports (1/8 in through 1 in), and the right step is set by the air consumption of the downstream circuit - size up where demand is higher. This unit is the low-pressure regulator type (code L); the exact regulation range for the low-pressure variant is not published in our sheet, so ask us to confirm it against your set pressure before ordering. Filter grade is a real choice: 40 um is the standard element and 5 um (code W, as fitted here) suits finer protection. Drain is the other filter-side decision: differential-pressure (default), automatic (A) or manual (M). Gauge options are an embedded square gauge or an external round gauge, in MPa, psi or bar scales - this unit carries a round psi gauge. Thread is PT as standard, with G and NPT as catalogue options; this unit is the G-thread version. The reverse/check valve (K) and bracket are fitted as decoded. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your application - downstream consumption, working pressure and line length - and we will confirm the sizing against the datasheet curves on request before you order.
The L is the low-pressure regulator type, intended for circuits set below the standard regulator's range; the exact regulation range for the low-pressure variant is not published in our sheet, so ask us to confirm it. The W gives the 5 um filter element instead of the standard 40 um, the C2 is a round gauge scaled in psi, G is the G-thread port, and K is a fitted reverse/check valve. The filter bowl uses the differential-pressure drain (the default): it bleeds collected condensate automatically whenever the pressure drop across the element builds up, with no daily manual draining needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.