The AirTAC GC200-08 AirTAC F.R.L. Combination, PT1/4 Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC200-08 is a three-piece F.R.L. combination that conditions compressed air in one assembly: a filter removes water and particulate, a regulator sets and holds downstream pressure, and a lubricator adds oil mist for air tools and cylinders. This configuration is the size 200 unit with a 1/4 inch PT port, a manual drain on the filter bowl, the standard 40 um filter element, a round pressure gauge reading in psi, a reverse/check valve fitted, and a mounting bracket included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The regulator adjustment range with manual drain is 0.05-0.9 MPa (7-130 psi). The filter and lubricator bowls are PC (polycarbonate) at this size.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of port sizes, PT, G or NPT threads, manual, automatic or differential-pressure drains, 40 um or 5 um (W) filtration, gauge scale in MPa, psi or bar, and a reverse/check valve option. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC200-08 AirTAC F.R.L. Combination, PT1/4 Port |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeding a workholding or light-assembly press circuit: the filter strips water and swarf from the shop air, the regulator holds a stable set pressure for consistent clamping, and the lubricator mists oil to the press cylinder seals and valves.
Supplying the air cylinders on a carton-forming or case-packing conveyor: clean, regulated, lubricated air keeps the diverters and pushers cycling smoothly through a full shift, with the manual drain emptied at scheduled checks.
Conditioning the supply to a technician's bench where air tools are plugged in all day: the 40 um filter catches pipe scale and condensate, the psi gauge shows the set pressure at a glance, and the lubricator keeps impact drivers and ratchets running.
Start with the port and size step: the GC series runs 200/300/400/600, and the right step depends on the air consumption of the downstream circuit, so have us check the published flow curves against your demand before ordering. Then choose the drain: manual (as on this unit) means someone opens the drain periodically; automatic drains collected water by itself; differential-pressure is the default. Filter grade is 40 um standard or 5 um with the W code if finer filtration is needed. The gauge can be the embedded square type or an external round gauge, with MPa, psi or bar scales; this unit carries a round psi gauge. Thread is PT as standard, with G (BSPP) and NPT as order options, and a reverse/check valve (K) is available where backflow protection matters.
Flow for this family is published as curves, not a single rating, so please ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one number we can quote. Tell us your operating pressure and the air consumption of the downstream equipment, and we will confirm the sizing from the datasheet before you order.
The M in the code GC20008MC2K means the filter bowl has a manual drain: condensate collects in the PC bowl and someone opens the drain at intervals. If you would rather not rely on scheduled checks, the GC series is also offered with an automatic drain (code A) or the differential-pressure drain that is the default, in the same sizes and ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.