The AirTAC GC200-08L AirTAC F.R.L. Combination, PT1/4, 5 um, psi gauge is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200-08L is a three-piece AirTAC GC-series F.R.L. combination that filters, regulates and lubricates compressed air in one assembly: a separate filter, a separate regulator and a separate lubricator, sized 200 with a PT1/4 (1/4 in) PT-threaded port. This configuration carries the W filter element (5 um, finer than the standard 40 um), a differential-pressure drain on the filter bowl, the low-pressure (L) regulator type, a fitted round external gauge with a psi scale, and a mounting bracket. The PC (polycarbonate) bowls let you see condensate and oil level at a glance; the differential-pressure drain bleeds accumulated water automatically as flow passes through, with no drain line to plumb.
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in and PT, G (BSPP) or NPT threads, plus drain, filter-grade, gauge and low-pressure options. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC200-08L AirTAC F.R.L. Combination, PT1/4, 5 um, psi gauge |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
A jig or fixture circuit that clamps workpieces at reduced pressure: the low-pressure (L) regulator holds the gentle set point, the 5 um element keeps fine contamination out of the clamp cylinders, and the lubricator feeds their seals on every stroke.
A 1/4 in drop feeding carton-sealers or wrap stations: the filter removes water and fine particulate, the regulator sets the working pressure read on the psi gauge, and the lubricator mists oil to the line's air cylinders.
A bench setup running pneumatic test rigs: the 5 um filter polishes the shop air, the low-pressure regulator trims supply to the test pressure, and the lubricator adds controlled oil mist only where the downstream tooling needs it.
Step through the real, decodable choices when selecting this unit. Size 200 with a PT1/4 port suits lines plumbed at 1/4 in; step up to sizes 300, 400 or 600 when the circuit needs larger ports and more flow. The W code gives you the 5 um element instead of the standard 40 um - choose it when downstream valves and cylinders need finer particulate removal. The differential-pressure drain is the default and works without a pilot line; an automatic or manual drain can be ordered instead if your installation prefers one. The L code selects the low-pressure regulator type - the exact adjustment range for the low-pressure type is not published in our data, so confirm it against your set pressure before ordering. This unit ships as configured with a round external gauge on a psi scale (embedded square gauge is the standard alternative, with MPa/psi/bar scales available), a mounting bracket included, and no reverse/check valve. Thread is PT as standard; G (BSPP) and NPT are orderable options.
One honest note on sizing: AirTAC publishes flow for this series as curves, not a single rated number, so we will not quote you a flow figure. Send us your application details and we will confirm the datasheet and the right size before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a l/min or SCFM number. Tell us your application - inlet pressure, set pressure and the downstream demand - and we will confirm the datasheet curve and check the 200 size against your requirement before you order.
The L code selects the low-pressure regulator type instead of the standard type. It is the right choice when the circuit must run at reduced set pressures. The exact adjustment range for the low-pressure type is not published in our data extract, so confirm your set pressure with us before ordering. Everything else in the code decodes normally: 200 size, PT1/4 PT-threaded port, W 5 um filter element, differential-pressure drain, round psi gauge, bracket included, no reverse valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.