The AirTAC GC20006C2WG AirTAC F.R.L. Combination, G1/8 Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC20006C2WG is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-preparation set. This size 200 configuration carries a 1/8 in port on the G (BSPP) thread, with PT as the standard thread and G or NPT available as order options. The filter stage uses the fine 5 um element (code W) with a differential-pressure drain, the regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, and the lubricator delivers oil mist downstream. A round external gauge with a psi scale is fitted, the mounting bracket is included, and the polycarbonate bowls suit the maximum 1.0 MPa (145 psi) inlet pressure and -5 to 70 C (non-freezing) operating range.
This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600 with a choice of port, thread, drain type, filter grade, gauge and scale, so a matching set can be specified for most compressed-air lines. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for this exact model on request.
| Model | GC20006C2WG AirTAC F.R.L. Combination, G1/8 Port |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds clean, regulated and lubricated air to spray guns and air-assisted applicators, where the 5 um element helps protect the finish from water and particulate carryover.
Prepares the air feeding carton sealers, case packers and wrapper cylinders on a packaging line, holding a steady regulated pressure and oil mist for the actuators.
Supplies filtered, regulated and lubricated air to impact wrenches and nutrunners at a bench or cell, with the included bracket mounting the set at the drop point.
Start with the port step: size 200 with a 1/8 in port is the smallest GC frame, so step up to 300, 400 or 600 if the line needs a larger port and more flow. Choose the filter grade - 40 um is the standard element, while this unit's 5 um (W) element suits finer protection of downstream tools and valves. Pick the drain type: differential-pressure (as fitted here), automatic (A) or manual (M). Select the gauge style and scale - the embedded square gauge is standard, an external round gauge is optional, and scales are available in MPa, psi or bar; this model carries the round psi gauge. Confirm the thread: PT is the standard, with G (BSPP) and NPT as order options. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your line pressure and the air demand of your equipment, and we will confirm the datasheet flow curves for this exact model on request.
The differential-pressure drain is the default on the GC filter stage: it bleeds condensate automatically when the pressure differential across the filter rises. If you prefer a fully automatic drain, order the A version; for a hand-operated drain, order the M version. The rest of the specification, including the 5 um element and psi gauge on this model, stays the same.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.