The AirTAC GC20006C2WK AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006C2WK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one coordinated set. This configuration carries the W filter element (5 um, finer than the 40 um standard), a differential-pressure drain on the filter bowl, a standard regulator with a 0.15-0.9 MPa (20-130 psi) adjustment range, and a reverse/check valve fitted to hold downstream pressure. The round external gauge is fitted with a psi scale, and the bowls on this 200 size are polycarbonate (PC).
This is a genuine AirTAC part in the GC200 size with PT1/8 ports (PT is the standard thread; G and NPT are orderable options). The GC line also comes in 300, 400 and 600 sizes with larger ports for higher flow, and with choices of drain type, filter grade, gauge scale and thread. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC20006C2WK AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds cleaned, regulated and lubricated air to the pneumatic clamps and tool-change cylinders on a compact machining centre, with the 5 um element protecting fine-tolerance valve spools.
Supplies the air cylinders that push, divert and seal cartons on a packaging conveyor, keeping the lubricator topped up so cylinder seals run smoothly through long production shifts.
Conditions the supply to small pneumatic actuators on lab sample-handling and testing equipment, where the psi gauge, check valve and fine 5 um filtration support repeatable, clean actuation.
Start with size and port: the 200 step with PT1/8 ports suits the smallest branch lines, while GC300/400/600 step up in port and flow capacity - match the step to the air demand of the circuit. Then set the options that matter: the 5 um W element here gives finer particulate removal than the 40 um standard if downstream valves and cylinders need cleaner air; the differential-pressure drain flushes collected water automatically as flow passes through, with automatic (A) and manual (M) drains available as alternatives; and the fitted round gauge here reads in psi, with MPa and bar scales also offered. The reverse/check valve (K) holds set pressure if the upstream supply drops.
Thread is PT as standard with G (BSPP) and NPT orderable, and the mounting bracket is included. Because AirTAC publishes flow as curves rather than one rated number, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one rated flow number we can quote. Send us your application's air demand and we will confirm the sizing from the datasheet curves on request before you order.
The W code in GC20006C2WK selects the optional 5 um element instead of the 40 um standard, giving finer water-borne particulate removal for sensitive downstream components, and the K code fits a reverse/check valve that holds downstream pressure if the upstream supply is interrupted. Both are standard catalogue options on the GC combination.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.