The AirTAC GC20006F2 AirTAC F.R.L. Unit, 1/8 in PT, FRL Combination is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006F2 is an AirTAC GC200 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package for compressed air. This configuration carries PT1/8 (1/8 in) ports with PT thread as standard, 40 um standard filtration, a differential-pressure drain on the filter bowl, a standard regulator adjustable from 0.15-0.9 MPa (20-130 psi), an embedded square gauge reading in psi, and a mounting bracket included. The filter and lubricator bowls are polycarbonate (PC) at this size. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600 with a choice of drain type, 5 um (code W) filtration, gauge scale and G or NPT thread options; flow figures are published as curves rather than a single rating, so we confirm the datasheet and sizing for your application on request.
| Model | GC20006F2 AirTAC F.R.L. Unit, 1/8 in PT, FRL Combination |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Supplies filtered, regulated and lubricated air to the clamping cylinders and fixtures on a CNC machining cell, keeping moisture and swarf out of the valves while holding a set working pressure at the spindle-side circuit.
Feeds the gripper and pusher cylinders on a packaging conveyor, where the lubricator carries a fine oil mist to the seals and the regulator keeps actuator speed consistent as line pressure fluctuates.
Conditions the air feeding nail guns and staple tools in a joinery shop: the filter removes water and dust from a compressor ring main, the regulator sets a safe tool pressure, and the lubricator mists oil into the tool inlets.
Start with the size and port: the 200 size here gives PT1/8 ports, and stepping up through 300, 400 and 600 increases both port size and flow capacity, so match the step to the air demand of the downstream circuit. Choose the drain on the filter section: differential-pressure (this unit), automatic, or manual. Choose the filter grade: 40 um standard, or 5 um with code W where finer particulate removal is needed. The gauge on this unit is the embedded square type reading psi; MPa and bar scales are catalogue options. PT thread is standard on this model, with G (BSPP) and NPT available as order options, and a mounting bracket is included.
Flow for this family is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one number we can honestly quote. Send us your application details and we will confirm the flow figures from the GC200 datasheet and check the sizing with you before you order.
A blank drain position in the model code means the differential-pressure drain, which is the default on the filter section. Automatic (code A) and manual (code M) drains are catalogue options on the same units, so you can order a GC200 with a different drain if your installation suits it better.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.