The AirTAC GC20006F2W AirTAC F.R.L. Combination, PT1/8, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006F2W is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, pressure regulator and lubricator assembled as one air-preparation set. This configuration is the size 200 unit with a PT1/8 port, the fine 5 um filter element (code W), a differential-pressure drain on the filter bowl, and a fitted square gauge scaled in psi. In use it removes water and particulate down to 5 um, holds a stable downstream pressure adjustable from 0.15-0.9 MPa (20-130 psi), and meters oil mist into the air stream to extend the life of downstream pneumatic components.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and options including 40 um or 5 um filtration, automatic, manual or differential-pressure drains, MPa, psi or bar gauge scales, G or NPT threads, and a reverse/check valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC20006F2W AirTAC F.R.L. Combination, PT1/8, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding the air cylinders that drive capping heads and fill nozzles: the 5 um element keeps moisture and fines out of the valve stack, the regulator holds a steady setting shift to shift, and the lubricator keeps the cylinder seals working over long production runs.
Supplying gripper and clamp actuators on a robotic weld cell, where a stable regulated pressure keeps grip force repeatable and the fine 5 um grade protects the small pilot valves mounted on the arm.
Conditioning the air at the drop for carton sealers and pressure-sensitive labelers: clean, regulated and oil-misted air keeps the staple and taping heads and the label-applicator cylinders running through a full shift without pressure drift.
Start with the size and port: the 200 series with its PT1/8 port suits compact circuits and low-to-moderate air demand, while 300, 400 and 600 step up in port size and flow capacity. Because flow is published as curves rather than a single rated figure, send us your air demand and we will confirm sizing against the datasheet before you order. Then choose the drain type: this unit uses the differential-pressure drain (default); automatic (A) and manual (M) versions exist if your maintenance routine suits them better. The 5 um element (W) is the finer choice for sensitive valves and instruments; the 40 um standard element suits general circuits.
This configuration carries the square gauge scaled in psi; MPa and bar scales, and an external round gauge, are available as options. The thread here is PT as standard - G (BSPP) and NPT are catalogue options to order if your piping needs them. A mounting bracket is included. If you want the functions combined in fewer bodies, the GFC two-unit (filter-regulator plus lubricator) or the GFR filter-regulator alone may fit; ask us to compare.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a figure here. Tell us your operating pressure and air demand and we will confirm the sizing from the datasheet on request before you order.
The W in the code GC20006F2W specifies the optional 5 um element, the finer grade suited to pilot valves, instruments and other sensitive downstream components. The GC series standard element is 40 um for general circuits; if your application does not need fine filtration, ask us for the 40 um variant of the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.